Milling Connector,45 Series

361 in, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.101 in, Head Diameter 0.Socket Head Cap Screw, Head Type Button, System of Measurement Inch, Drive Type Socket, Drive Size 1/8 in, Material Alloy Steel, Finish Black Oxide, Thread Size #10-24, Minimum Thread Length 1 in, Fastener Length 1 in, Head Height 0.3, Flange Diameter Not Applicable, Flange Thickness Not Applicable.

Retaining Ring Applicator, Product Type Retaining Ring Applicator, Material Steel, Finish Plain, Blade Width 0.

Must Order 4 Each Min Must Order 4 Each Min.Conversion Plug.

Sleeve,Adapter D4.

Valve Seat.

Non-ANSI Onyx Two-Tone Anti-Snag T-Shirt.

5 mm, Milling Connector, Overall Length 59 mm, Overall Width 19.Milling Connector, Gray, Anodized, Overall Height 5.5 mm, Aluminum, 45 Series, System of Measurement Metric, Milling Connector, For Slot Width 10 9/64 mm.

Hoop Gasket1,EK20R.

5 mm, Aluminum, 45 Series, System of Measurement Metric, Milling Connector, For Slot Width 10 9/64 mm.5 mm, Milling Connector, Overall Length 59 mm, Overall Width 19.Milling Connector, Gray, Anodized, Overall Height 5.

Hoop Gasket1,EK20R.