1-3/4 In. Thick Stainless Steel Door Edge Reinforcer

25 oz P Style ValueLine Clip-on Wgt 25pk.1.

.3/4 TON Component Stabilizing Stand - Single Post The heavy-duty materials and precise adjustment allow the operator to work with speed and ease.

Safety Glasses, Gray, Orange temples.

SPEAKMAN RPG41-0108 Repair Part Mark II Shower Index.

3.6.

Long Lag Shield, 5/16" Dia, 1-3/4" L, Alloy Steel Plain, 50 PK Size: 5/16 inch X 1-3/4 inchAllows for lag screw bolts to be installed into concrete, brick & blockInserts into a hole by tapping with a hammer until flushLag screw expands the lag shield against the walls of the holeDrill hole with masonry drill bit based on diameter on anchor. The sides of the lag shield push out against the inside of the hole once the lag screw is installed, thereby locking it in place. After drilling a hole into the material, lag shields should be tapped into place ribbed side first until flush with the surface.Lag shield anchors allow lag screws to be installed into concrete and masonry walls.

Accommodates lockset or deadbolt with any backset. 1-3/4 in.Stainless steel constructionAccommodates lockset or deadboltMounting hardware includedA Phillips head screwdriver is required for installationFor further dimensional information, please see the line drawing.

6.

Thick Stainless Steel Door Edge Reinforcer Used to reinforce door edgesHelps prevent a forced entryMounts to door edge 1-3/4 in.

6.1. Size: #12-24 X 5/8 inchRound Head, Phillips/Slotted Combination DriveUse with nuts or pre-threaded holes of the same diameter & thread sizeOften used in machinery & appliancesNuts and washers not includedThread Type: Coarse, Thread Class: UNC-2A, Point Style: BluntSpecification(s) Met: ASME B18.