GN728-27-180-B-BL Cabinet U-Handle

GN 42 leveling feet are simple, economically priced components and can be used universally thanks to the wide range of possible combinations of the base and the stud / socket versions..

GN 638 ball jointed leveling feet are a low cost solution for clamping operations or for load bearing purposes..

2 adjustable levers are the result of modern industrial design: glass fiber reinforced thermoplastic with molded-in stainless steel inlay and zinc plated components.Made in the USA, WN 300.

.DIN6332-M10-55-SKN Grub Screw Unhardened The tip diameter of these grub screws is smaller than the diameter of the threaded stud, allowing them to be screwed into position from the tip side.

The static load rating of these feet is limited due to the acceptable load rating of the stud.GN40-80-3/4X10-100-A1-UK Leveling Feet The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. The values given in the table assume a straight compressive load, perpendicular to the foot..

.JW Winco GN5337. Resistant to solvents, oils, grease and other chemical agents.

.

3-M12-KS Ball Plunger A typical example is push-on / push-off applications.

.GN728-27-180-B-BL Cabinet U-Handle The installation can be carried out from the back (type A) as well as from the operator’s side (type B). Hole center dimension is identical in both versions, so they can be mounted in pairs opposite each other.

3-M12-KS Ball Plunger A typical example is push-on / push-off applications.