Spiral Flute Tap, M20-2.00, Modified Bottoming, 0 Flutes, Metric Fine

About The 00 mm, Powdered Metal, TiCN, Thread Length 25.Spiral Flute Tap, Thread Size M20x2, Metric Fine, Overall Length 140.00 mm, Thread Limit D7, Thread Direction Right Hand, Number of Flutes 4

Spiral Flute Tap, Thread Size M20x2, Metric Fine, Overall Length 140.00 mm, Powdered Metal, TiCN, Thread Length 25.00 mm, Thread Limit D7, Thread Direction Right Hand, Number of Flutes 4

Cutting Tools,Taps,Spiral Flute 4-Flute Taps

Straight Flute Hand Tap, 1-1/4-12, Taper, 6 Flutes, UNF

Square End Mill, 0.30 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.45 mm, Overall Length 45.00 mm, Shank Dia.

Cutting Tools,Taps,Spiral Flute 4-Flute Taps

Specifications of Spiral Flute Tap, M20-2.00, Modified Bottoming, 0 Flutes, Metric Fine
Category
Instock	instock

Last Updated June 19th, 2024 08:41 pm

Spiral Flute Tap, M20-2.00, Modified Bottoming, 0 Flutes, Metric Fine

More Varieties

Rating :- 9.74 /10

Votes :- 30

Jobber Drill Bit,I,Carbide

Jobber Length Drill Bit, Drill Bit Size I, Drill Bit Point Angle 140 Degrees , Carbide, TiAlN, Decimal Equivalent 0.2720, Letter, Drill Bit Point Type R Thinning Point, Coolant Through, Number of Coolant Holes 2.

Cutting Tools,Drill Bits,Jobber Length Drill Bits

OSG

3.50mm Carbide TiN 140 Deg. Jobber Length Drill Bit

50 mm, Drill Bit Point Angle 140 Degrees , Carbide, EgiAs, Decimal Equivalent 0.1378, Metric, Drill Bit Point Type X Thinning Point, Non-Coolant Through.

Cutting Tools,Drill Bits,Jobber Length Drill Bits

OSG

Thread Forming Tap, 9/16-12, Plug, TiCN, 0 Flutes

20 mm, Thread Limit H9.-12, UNC, Overall Length 3 37/64 in, Cobalt, TiCN, Right Hand, Thread Length 1 in, 75 Percent Thread Drill Size 13.Thread Forming Tap, Thread Size 9/16 In.

Cutting Tools,Taps,Thread Forming Taps

OSG

Spiral Flute Tap, 1/2-20, Bottoming, UNF, 3 Flutes, TiCN

Spiral Flute Tap, Thread Size 1/2 In.-20, UNF, Overall Length 3 11/32 in, Powdered Metal, TiCN, Thread Length 9/16 in, 75 Percent Thread Drill Size 11.40, Thread Limit H5, Thread Direction Right Hand, Number of Flutes 3.

Cutting Tools,Taps,Spiral Flute 3-Flute Taps

OSG

Square End Mill, 3/16 in Milling Dia., Carbide, TiAlN, Straight, Length of Cut 3/8 in, Overall Length 2 in, Shank Dia.

3/16 in.Square End Mill,2.000" L,0.

Cutting Tools,End Mills,Square 2-Flute End Mills

OSG

Square End Mill, 0.30 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 0.45 mm, Overall Length 45.00 mm, Shank Dia.

30mm dia,0.45mm Cut L 4.00 mm.Carbide End Mill,0.

Cutting Tools,End Mills,Square 2-Flute End Mills

OSG