3/4 Drive, SAE Socket, 12 Points

Compact Cylinder ADNGF-11/4"-3/4"-P-A Stroke=0,75 ", Piston Diameter=1 1/4", Based On The Standard=Iso 21287, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any.

Linear Drive Dlgf-Kf-25-250-Ppsa Stroke=250 Mm, Piston Diameter=25 Mm, Cushioning=Pps: Self-Adjusting Pneumatic End-Position Cushioning, Assembly Position=Any, Guide=Recirculating Ball Bearing Guide.

Width=42 Mm, Based On The Standard=Iso 5599-1, Assembly Position=Any, Pneumatic Vertical Stacking=Pressure Regulator For 1, Controller Function=(* Output Pressure Constant, * With Secondary Exhaust).Regulator Plate VABF-S1-1-R1C2-C-10 10 Bar.

QTi Non Sparking, Non Magnetic Slogging Open Wrench - 1-3/4" Do not use cheater bars or use external leverage..

125 in.25" Round Pole Cap Pole (Inside) Designed for use with round radius tubing.. - 3.

.

. Copper Titanium Tools are also certified for safe use in magnetic fields upto 3 Tesla.3/4" Drive, SAE Socket, 12 Points Copper Titanium Hand Tools are 100% Beryllium Free and are much stronger than Aluminium Bronze Tools Copper Titanium Hand Tools are Certified for Safety as per IS 4595:1969 (2006) Standards and are Torque Tested to IS 6131:1980 Standards.

.3" Standard Square Pole Cap Pole (Outside) 2.

Copper Titanium Tools are also certified for safe use in magnetic fields upto 3 Tesla..3/4" Drive, SAE Socket, 12 Points Copper Titanium Hand Tools are 100% Beryllium Free and are much stronger than Aluminium Bronze Tools Copper Titanium Hand Tools are Certified for Safety as per IS 4595:1969 (2006) Standards and are Torque Tested to IS 6131:1980 Standards.

.5 in.3" Standard Square Pole Cap Pole (Outside) 2. Pole (Inside) Designed for use with sharp corner or small radius tubing.