Compress Spring,13/16x0.045 In,Pk5

1 in, Actual Width 0. Metal Detectable FDA Buna-N O-Ring, Dash 235, PK2 Range -40 Degrees to 250 Degrees F, FDA Approved Yes 3..139 in, Dash Number 235, Color Black, Durometer 70 Shore A, Meets/Exceeds FDA, Nominal Outside Dia.

7 in, Actual Width 0.139 in, Dash Number 210, Color Brown, Durometer 75 Shore A, Nominal Outside Dia. O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

13/16 in, Nominal Width 1/8 in, Actual Inside Dia.7 in, Actual Width 0. O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Rectangular, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.139 in, Dash Number 211, Color Black, Durometer 70 Shore A, Nominal Outside Dia.

443 in, Temp.2 in, Actual Width 0..

Strainer, ADA Compliant No, Outlet Location Bottom, Resistance Properties Rust Resistant, Product Type Sink Drain, Pipe Outside Diameter 4 1/2 in, Shape Round, Strainer Material Stainless Steel, Basin Finish Unfinished, Grate Surface Type Not Applicable, Color Silver, Overall Height 2 3/8 in, Drain Material Stainless Steel.

Dial Thermometer, Temperature Range 50 Degrees to 550 Degrees F/10 Degrees to 290 Degrees C, Stem Length 6 in, Dial Diameter 5 in, 1/2 in NPT, Adjustable-Angle, Includes NIST-Traceable Certificate No, Housing Material 304 Stainless Steel, Lens Material Glass.

9 Lbs, Deflection @ Load 0.48 Lbs/In, Meets/Exceeds ASTM A313, Package 5.28 In, Spring Rate 42.Compression Spring, Precision, 302 Stainless Steel, Finish Plain, Overall Length 13/16 In, Outside Dia 0.

362 in, Head Height 0.137 in, Drive Size #2, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.333 in.6.

045 In, End Type Closed and Ground, Compressed Length 0.300 In, Wire Type Round, Wire Dia 0.

362 in, Head Height 0.Machine Screw, Head Type Round, Material Steel, Finish Zinc Plated, Drive Combination Slotted/Phillips, Thread Size #10-32, Fastener Length 1/4 in, Head Width 0.6.