Pull Handle, Natural, 1-1/32 In. H, Unthr. Through Holes

Piston Seal Kit,1 In Bore Dia,6Pcs 3 1/4 in, Seal Material Buna N, Number of Pieces 6, Color Black, Temp. Range -40 Degrees to 250 Degrees F, Includes (2) Each: 80 Durometer Buna U-Cups, Hytrel Backup Rings, 70 Durometer Buna O-Rings.

Resin Bonded Filter Cartridge, Reduces Particulates, Micron Rating 10, Flow Rate 5 gpm, Filter Media Acrylic, Polyester Blended Fibers Impregnated with Phenolic Resin, For Use With 10 in Housings, Application Particulate Removal, Maximum Pressure 50 psi, Maximum Temperature 250 Degrees F, Package Quantity 6.

Filter Bag, Reduces Particulates, Solids, Flow Rate 160 gpm, Maximum Pressure 70 psi, Micron Rating 5 micron, Diameter 7 in, Material Polypropylene, Overall Length 31 1/2 in, Application Adhesives, Bulk Chemical, Coatings, Coolant, Ink, Paint, Petroleum Oil, Pre-filters for Finer Cartridges, Resin, Solvent, Water, Bag Size 2, Collar Type Ring, Features Carbon Steel Snap Ring for Positive Sealing in Competitive Vessels, Perform at High Flow Rates and Viscosities to 10,000 cps or Higher.

0 in, Color Black.7 in, Link to Link Pitch 1.

HVX9000, For Use With Frame 6, NEMA 1, NEMA 12/IP54, SVX Industrial Variable Frequency Drives, Mounting Power Section Heat Sink.

197 in, Overall Length 0.745 in, Calibration Tolerance 0.25 mg.Calibration Weight, Nominal Mass 50 g, Calibration Weight Class 2, Calibration Certificate NVLAP - Accredited, Calibration Weight Style Cylinder, Calibration Weight Material Stainless Steel, Measurement Type Metric, Includes Case, Glove, Number of Pieces 1, Finish Polished, Calibration Weight Compliance Agency ASTM, Overall Height 1.

3/4 in, Screw Size #8, Color Natural, Grip Height 23/32 in, Hardware Included, Product Type Pull Handle to Ctr.. Pull Handle, Natural, 1-1/32 In. 4 19/32 in, Vert.

Tee, Cast Iron, Class Class 125, For Pipe Schedule 40, 1 1/2 in, Flanged, 1 1/2 in, Flanged, 1 1/2 in, Flanged, 175 psi @ 150 Degrees F Maximum Operating Pressure.

to Ctr.. Through Holes Pull Handle, Load Rated (Y/N) N, Mounting Type Unthreaded Through Holes, Material 304 Stainless Steel, Finish Natural, Mounting Hole Center to Center 1 1/32 in, Inner Mounting Hole Ctr. 4 19/32 in, Vert.

Tee, Cast Iron, Class Class 125, For Pipe Schedule 40, 1 1/2 in, Flanged, 1 1/2 in, Flanged, 1 1/2 in, Flanged, 175 psi @ 150 Degrees F Maximum Operating Pressure.