Fl Fitting,Crimp,3/4 Hose,3/4 Fl

Resin Bonded Filter Cartridge, Reduces Particulates, Micron Rating 10, Flow Rate 5 gpm, Filter Media Acrylic, Polyester Blended Fibers Impregnated with Phenolic Resin, For Use With 10 in Housings, Application Particulate Removal, Maximum Pressure 50 psi, Maximum Temperature 250 Degrees F, Package Quantity 6.

Filter Bag, Reduces Particulates, Solids, Flow Rate 160 gpm, Maximum Pressure 70 psi, Micron Rating 5 micron, Diameter 7 in, Material Polypropylene, Overall Length 31 1/2 in, Application Adhesives, Bulk Chemical, Coatings, Coolant, Ink, Paint, Petroleum Oil, Pre-filters for Finer Cartridges, Resin, Solvent, Water, Bag Size 2, Collar Type Ring, Features Carbon Steel Snap Ring for Positive Sealing in Competitive Vessels, Perform at High Flow Rates and Viscosities to 10,000 cps or Higher.

9 in, Height 3.0 in, Bend Radius 5.

HVX9000, For Use With Frame 6, NEMA 1, NEMA 12/IP54, SVX Industrial Variable Frequency Drives, Mounting Power Section Heat Sink.Flange Kit Type 1,12, Frame Size 6 No.

745 in, Calibration Tolerance 0.

Pull Handle, Natural, 1-1/32 In. Through Holes Pull Handle, Load Rated (Y/N) N, Mounting Type Unthreaded Through Holes, Material 304 Stainless Steel, Finish Natural, Mounting Hole Center to Center 1 1/32 in, Inner Mounting Hole Ctr..

Tee, Cast Iron, Class Class 125, For Pipe Schedule 40, 1 1/2 in, Flanged, 1 1/2 in, Flanged, 1 1/2 in, Flanged, 175 psi @ 150 Degrees F Maximum Operating Pressure.

Fl Fitting,Crimp,3/4" Hose,3/4" Fl 3/4 in, Hydraulic Flange Size 3/4 in, Flange Code 61, Fitting Material Carbon Steel, Length (In.31 in, For Hose Dash Size -12, Finish Trivalent Chromate, Zinc, Standards SAE J516.) 3.

Tee, Cast Iron, Class Class 125, For Pipe Schedule 40, 1 1/2 in, Flanged, 1 1/2 in, Flanged, 1 1/2 in, Flanged, 175 psi @ 150 Degrees F Maximum Operating Pressure.

) 3.