Coolant Additive,5 Gal,Bucket

One End Tapped Linear Shaft, For Use With -, System of Measurement Inch, Surface Roughness 16 uin.

Tool Post Holder, For Tool Post Type QITP35N, Overall Height 2-1/2 in, Overall Length 3-3/4 in, For Shank Type Square, For Shank Height 1 in.

Pressure Rating 150 psi, Valve Temp.Manual Air Control Valve,4-Way,1/4In NPT Range 32 Degrees to 175 Degrees F, Coefficient of Volume 0.

787 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 3/16 in, Bore Type Cylindrical, Center Height 2.125 in, Closure Single Sealed, Expansion Type Fixed, For Environment Highly Dusty and Dirty, Housing Material Cast Iron, Housing Type Square, Included Bearing WJB HC206-19 Insert Bearing, Lubricant Material Chevron SRI 2, NLGI #2 Equivalent, Maximum Speed 5,500 RPM Grease, Maximum Temperature 200 Degrees F.

906 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 1/4 in, Bore Type Cylindrical, Center Height 1 13/16 in, Closure Single Sealed, Expansion Type Fixed, For Environment Highly Dusty and Dirty, Housing Material Cast Iron, Housing Type Rhombus, Included Bearing WJB HC207-20 Insert Bearing, Lubricant Material Chevron SRI 2, NLGI #2 Equivalent, Maximum Speed 4,700 RPM Grease.2 Bolt Flange Bearing, Back Side to Center Width 0.

Circular Paper Chart, Chart Size 6 In, Range -100 to 0 F/C, Recording Time 7 Day, For Use With Dickson KT663 & KT665, Package Quantity 60.

Machining Fluid Additive, Fluid Type Low Foam, Silicone Free, Container Size 5 gal, Container Type Pail, Color Opaque, White, Base Formulation Water Based, Application Tank Side Add to Control Foam in Water Miscible Coolants, Washing Compounds and Floor Soaps, Features Can Be Added Directly to the Sump, Upstream of the Foam or Directly on the Foam.

76 in, Standards RoHS, Color Black, Finish Matte.00 mm, Overall Length 2.00mm, Screw Length 30.

Machining Fluid Additive, Fluid Type Low Foam, Silicone Free, Container Size 5 gal, Container Type Pail, Color Opaque, White, Base Formulation Water Based, Application Tank Side Add to Control Foam in Water Miscible Coolants, Washing Compounds and Floor Soaps, Features Can Be Added Directly to the Sump, Upstream of the Foam or Directly on the Foam.

00mm, Screw Length 30.