reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Magnets,Rare Earth Magnets
J.W. WINCO

GN50.5-ND-32 Retaining Magnet

About The GN 50.5 retaining magnets are a shielded magnetic system. To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material

For diameter d1 ≥ 50 the magnetic surface is covered with a plastic cap. To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material. GN 50.5 retaining magnets are a shielded magnetic system.

Magnets,Rare Earth Magnets

GN50.5-ND-32 Retaining Magnet

Magnets,Rare Earth Magnets

Specifications of GN50.5-ND-32 Retaining Magnet

Category
Instockinstock

Last Updated

GN50.5-ND-32 Retaining Magnet
More Varieties

Rating :- 8.23 /10
Votes :- 31
GN319.2-50-1/2X13-B Revolving Ball Knob

GN319.2-50-1/2X13-B Revolving Ball Knob

, with handwheels or crank handles.2 both the threaded stud and tapped spindle type revolving ball knobs can be utilized instead of revolving handles e.g..

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs
  • J.W. WINCO
    • GN 300 adjustable levers have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position.

    GN 300 adjustable levers have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position.

    GN300-45-M6-25 Adjustable Lever Steel The insert is connected to the lever via serrations that can easily be disengaged..

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO
    • The thrust point of DIN 6304 tommy screws is designed to be used with or without a thrust pad for clamping.

    The thrust point of DIN 6304 tommy screws is designed to be used with or without a thrust pad for clamping.

    DIN6304-M12-70-E Tommy Screw, Fixed Bar The snap ring is a simple and quick method to connect the thrust pad to the tommy screw..

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs
  • J.W. WINCO
    • GN 43 leveling feet are intended for use in aggressive environments.

    GN 43 leveling feet are intended for use in aggressive environments.

    JW Winco GN43-50-5/8X11-75-D1-U Leveling Feet The wide range of possible combinations of the base and the stud / socket versions make these leveling feet universally applicable..

  • Hardware Supplies,Leveling Feet & Pads,Leveling Mounts
  • J.W. WINCO
    • JW Winco GN638-32-3/8X16-44-NV Leveling Feet

    JW Winco GN638-32-3/8X16-44-NV Leveling Feet

    .GN 638 ball jointed leveling feet are a low cost solution for clamping operations or for load bearing purposes.

  • Hardware Supplies,Leveling Feet & Pads,Leveling Mounts
  • J.W. WINCO
    • DIN 6311 thrust pads are utilized to transmit clamping forces.

    DIN 6311 thrust pads are utilized to transmit clamping forces.

    JW Winco DIN6311 40WG30 Thrust Pad They adapt to uneven and nonparallel surfaces and provide full surface clamping of the workpiece..

  • Sealing & Gasketing,Sheet Gaskets
  • J.W. WINCO
    • GN 50.5 retaining magnets are a shielded magnetic system.

    GN 50.5 retaining magnets are a shielded magnetic system.

    5-ND-32 Retaining Magnet For diameter d1 ≥ 50 the magnetic surface is covered with a plastic cap..GN50.

  • Magnets,Rare Earth Magnets
  • J.W. WINCO
    • DIN 6335 aluminum hand knobs are perfect for medium to heavy duty clamping applications.

    DIN 6335 aluminum hand knobs are perfect for medium to heavy duty clamping applications.

    .DIN6335-AL-50-M10-E-PL Star Knob Highly resistant to weathering and, also have good corrosion resistance properties.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs
  • J.W. WINCO
    • GN 50.5 retaining magnets are a shielded magnetic system.

    GN 50.5 retaining magnets are a shielded magnetic system.

    GN50. To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material.

  • Magnets,Rare Earth Magnets
  • J.W. WINCO
    • DIN 6335 aluminum hand knobs are perfect for medium to heavy duty clamping applications.

    DIN 6335 aluminum hand knobs are perfect for medium to heavy duty clamping applications.

    .DIN6335-AL-50-M10-E-PL Star Knob Highly resistant to weathering and, also have good corrosion resistance properties.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs
  • J.W. WINCO