reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Lifting,Pulling & Positioning,Lifting Equipment,Below the Hook Lifting Devices
CAMPBELL CHAIN & FITTINGS

Replacement CamPad Kit, For Use With 52 And 252 Single Drum Lifter Clamp

About The pCampbell p

pCampbell p

Lifting,Pulling & Positioning,Lifting Equipment,Below the Hook Lifting Devices

Replacement CamPad Kit, For Use With 52 And 252 Single Drum Lifter Clamp

Lifting,Pulling & Positioning,Lifting Equipment,Below the Hook Lifting Devices

Specifications of Replacement CamPad Kit, For Use With 52 And 252 Single Drum Lifter Clamp

Category
Instockinstock

Last Updated

Replacement CamPad Kit, For Use With 52 And 252 Single Drum Lifter Clamp
More Varieties

Rating :- 9.72 /10
Votes :- 29
Guide Wheel,Shielded,14 mm dia.,54 Sz

Guide Wheel,Shielded,14 mm dia.,54 Sz

Guide Wheel, Bearing Protection Shielded, Bore Diameter 14 mm, For Use With Slides, Lubrication Hepco Lubrication, Maximum Load Axial 1,800 N, Maximum Load Radial 3,200 N, Maximum Operating Temperature 120 Degrees C, Minimum Operating Temperature -20 Degrees C, Outside Diameter 54 mm, Series GV3, Size 54, System of Measurement Metric, Vee Angle 70 Degrees.

  • Bearings,V-belts & Power Transmission Equipment,Linear Bearings & Guides,Mounted Linear Bearings
  • HEPCOMOTION
    • Thruster,Block

    Thruster,Block

    Thruster,Block.

  • Hand Tools,Clamps,Clamp Accessories
  • DE-STA-CO
    • Solid Cast Aluminum Hammer w/Kevlar(R)

    Solid Cast Aluminum Hammer w/Kevlar(R)

    Solid Cast Aluminum Hammer w/Kevlar(R).

  • Hand Tools,Hammers and Striking Tools,Sledges
  • AMERICAN HAMMER
    • S-416 Open Spelter Socket, 1-1/4 to 1-3/8 in Cable, 2-1/2 in ID Eye, 13.19 in L, Forged Steel

    S-416 Open Spelter Socket, 1-1/4 to 1-3/8 in Cable, 2-1/2 in ID Eye, 13.19 in L, Forged Steel

    Crosby Open Spelter Socket, Series: S-416, 1-1/4 to 1-3/8 in Cable, 2-1/2 in Eye ID, 13.19 in Length, Forged Steel.

  • Lifting,Pulling & Positioning,Chains,Ropes & Cables,Wire Rope Fittings
  • CROSBY
    • S-319AN Standard Shank Hook, 22 ton Load, Steel Alloy

    S-319AN Standard Shank Hook, 22 ton Load, Steel Alloy

    Crosby Shank Hook, Standard, Series: S-319AN, 22 ton, Steel Alloy.

  • Lifting,Pulling & Positioning,Lifting Hardware,Chain & Cable Hooks
  • CROSBY
    • CAMSEG .75T-IPBKZ IP1234

    CAMSEG .75T-IPBKZ IP1234

    75T-IPBKZ IP1234.CROSBY 2717522 CAMSEG .

  • Food Storage,Food Containers
  • CROSBY
    • HR-1000MCT Heavy Lift Swivel Hoist Ring, 5450 kg at 5:1 Design Factor Load, 36.6 mm Bail, M30x3.5 Th
  • Lifting,Pulling & Positioning,Lifting Hardware,Hoist Rings
  • CROSBY
    • Replacement CamPad Kit, For Use With 52 And 252 Single Drum Lifter Clamp
  • Lifting,Pulling & Positioning,Lifting Equipment,Below the Hook Lifting Devices
  • CAMPBELL CHAIN & FITTINGS
    • HR-1000MCT Heavy Lift Swivel Hoist Ring, 5450 kg at 5:1 Design Factor Load, 36.6 mm Bail, M30x3.5 Th

    HR-1000MCT Heavy Lift Swivel Hoist Ring, 5450 kg at 5:1 Design Factor Load, 36.6 mm Bail, M30x3.5 Th

    5, 637 N-m Installation Torque, 206.Crosby Swivel Hoist Ring, Heavy Lift, Series: HR-1000MCT, 5450 kg at 5:1 Design Factor, 36.5 mm W.6 mm Bail Dia, M30x3.

  • Lifting,Pulling & Positioning,Lifting Hardware,Hoist Rings
  • CROSBY
    • Replacement CamPad Kit, For Use With 52 And 252 Single Drum Lifter Clamp
  • Lifting,Pulling & Positioning,Lifting Equipment,Below the Hook Lifting Devices
  • CAMPBELL CHAIN & FITTINGS