Fully Threaded Rod, M10-1.5mm, 1 M, Stainless Steel, 316, Plain Finish

3 mm, Outside Diameter 8 mm, Maximum Thickness 0.Lock Washer, Lock Washer Type Internal Tooth Lock, Finish Zinc Plated, Material Steel, For Screw Size M4, Inside Diameter 4.5 mm, Color Zinc, Dimensional Standards DIN 6798 J, Material Grade/Class Not Graded, Pack Size Small Pack, System of Measurement Metric, Package Quantity 100.

004 in to +0.0 in, Shoulder Diameter 3/4 in, Shoulder Diameter Tolerance -0.

Grade 5, 3/8"-24 Hex Head Cap Screw, Zinc Plated Steel, 4 in L, 10 PK Thread Length 1 in, Head Height 15/64 in, Head Width 9/16 in, Package Quantity 10.

Grade A490, 7/8"-9 Structural Bolt, Plain Steel, 4 3/4 in L, 5 PK 1 7/16 in, Head Height 35/64 in, Tensile Strength (PSI) 150,000 psi, Rockwell Hardness HRC25, Package Quantity 5.

218 in, Drive Size #4, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.556 in, System of Measurement Inch, Thread Type Coarse, Package Quantity 25.579 in, Minimum Head Width 0.

Grade 5, 1/2"-20 Hex Head Cap Screw, Black Oxide Steel, 3-1/2 in L, 10 PK Thread Length 1 1/4 in, Head Height 5/16 in, Head Width 3/4 in, Package Quantity 10.

Fully Threaded Rod, Material Grade/Class 316, Material Stainless Steel, Finish Plain, Thread Size M10-1.5, Overall Length 1 m, Tensile Strength 65,000 psi, System of Measurement Metric, Thread Direction Right Hand, End Type Straight Cut, Dimensional Standards DIN 976, Includes Nuts No, Color Silver, Made in North America Yes, Manufacturer Location Globally Sourced, Material Fabrication Cold Rolled, Material Quality Standards F593, Minimum Yield Strength 45,000 psi, REACH Compliant Yes.

5 in, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.

Fully Threaded Rod, Material Grade/Class 316, Material Stainless Steel, Finish Plain, Thread Size M10-1.5, Overall Length 1 m, Tensile Strength 65,000 psi, System of Measurement Metric, Thread Direction Right Hand, End Type Straight Cut, Dimensional Standards DIN 976, Includes Nuts No, Color Silver, Made in North America Yes, Manufacturer Location Globally Sourced, Material Fabrication Cold Rolled, Material Quality Standards F593, Minimum Yield Strength 45,000 psi, REACH Compliant Yes.

-8, Minimum Thread Length 2 1/2 in, Fastener Length 4 1/2 in, Head Height 1 in, Head Diameter 1.3, Flange Diameter Not Applicable.5 in, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.