R-330 Square O-Ring (ID: 2 1/8, CS 3/16, OD 2 1/2), 48PK

DURA-SYNC TORQUE 2312-8M-440 Timing Belt, 8M, 440 x 2312mm PL, T289.

DD DURAPREMIUM TORQUE belts meet or exceed USA RMA published ratings levels They are manufactured to perform at identical or higher levels than all major US Manufacturer's belts of the same type They offer a dependable, economical and hasslefree alternative to chain drives DURAPREMIUM TORQUE synchronous belts feature a classic trapezoidal tooth profile The tooth profile is low and has a large surface area at the tip of the tooth providing good support on sliding conveyor surfaces They are manufactured with a heavy duty, woven, nylon based fabric tooth covering The helically wound tensile cords are engineered, twisted and chemically set stranded fiberglass material They are made with a high temperature chloroprene polymer throughout the belt, and are proven through thousands of hours of customer use to be durable and dependable All DURAPREMIUM TORQUE timing belts are manufactured using the latest in synchronous belt technology.

SOLAS 8811-153-21 Prop Vol Al Aquamtc Lng Hub E+, #8811-153-21.

AMES TWKT Wheelbarrow Display And Sign .030 Sty.

BLACK & DECKER 14-563 Part, Handle Assembly.

For sanding of wood, paint, filler, metal, plastic, fiberglass, ceramics, drywall compound, spackle and anywhere traditional sandpaper is being used.Double Sided Flexible Sanding Pad/Sponge (Fine Grit) (2 Sponges), 2PK Specially useful for sanding moldings spindles, turnings and railings..

R-330 Square O-Ring (ID: 2 1/8", CS 3/16", OD 2 1/2"), 48PK The o ring is placed into a groove to secure them in place, and then compressed between two surfaces..

6 mm, OD:12.1 mm, CS:1.3 mm), 60PK The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.

.

.Square O-Ring (ID:9.1 mm, CS:1.3 mm), 60PK The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.