Carbide Drills For SS,Flute L 15.00mm

About The Carbide Drills for Stainless Steel, Drill Bit Size 2.38 mm, Drill Bit Point Angle 140 Degrees , R Thinning Point, Carbide, WXL, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.

Carbide Drills for Stainless Steel, Drill Bit Size 2.38 mm, Drill Bit Point Angle 140 Degrees , R Thinning Point, Carbide, WXL, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.0938

Cutting Tools,Drill Bits,Screw Machine Length Drill Bits

Square End Mill, 3/4 in Milling Dia., Carbide, TiCN, Straight, Length of Cut 1 in, Overall Length 3 in, Shank Dia.

Square End Mill, 5/8 in Milling Dia., Carbide, TiAlN, Straight, Length of Cut 2 1/4 in, Overall Length 5 in, Shank Dia.

Cutting Tools,Drill Bits,Screw Machine Length Drill Bits

Specifications of Carbide Drills For SS,Flute L 15.00mm
Category
Instock	instock

Last Updated June 28th, 2024 10:43 am

More Varieties

Rating :- 8.12 /10

Votes :- 33

Thread Forming Tap, 1/4-20, Bottoming, TiCN, 0 Flutes

-20, UNC, Overall Length 2 1/2 in, Cobalt, TiCN, Right Hand, Thread Length 5/8 in, 75 Percent Thread Drill Size 5.Thread Forming Tap, Thread Size 1/4 In.70 mm, Thread Limit H12.

Cutting Tools,Taps,Thread Forming Taps

OSG

Micro Drill,0.1004,Carbide,30.60mm Flute

008mm, Spiral, 30 Degrees.000mm/-0.

Cutting Tools,Drill Bits,Micro Size Drill Bits

OSG

Spiral Point Tap, 1/2-13, Plug, UNC, 3 Flutes, Oxide

Spiral Point Tap, Thread Size 1/2 In.4219 in, Thread Limit H7, Class of Fit JIS 2, Number of Flutes 3.

Cutting Tools,Taps,Spiral Point 3-Flute Taps

OSG

Square End Mill, 5.90 mm Milling Dia., Carbide, WXL, Straight, Length of Cut 8.90 mm, Overall Length 50.00 mm, Shank Dia.

Carbide End Mill,5.00 mm.90mm Cut L 6.90mm dia,8.

Cutting Tools,End Mills,Square 2-Flute End Mills

OSG

Taper L Drill Bit,128.00mm L,6.00mm dia.

00 mm, Metric, 10xD.

Cutting Tools,Drill Bits,Taper Length Drill Bits

OSG

Square End Mill, 5/8 in Milling Dia., Carbide, TiAlN, Straight, Length of Cut 2 1/4 in, Overall Length 5 in, Shank Dia.

Carbide End Mill,5/8in dia,2-1/4in Cut L 5/8 in.

Cutting Tools,End Mills,Square 4-Flute End Mills

OSG

Carbide Drills for SS,Flute L 15.00mm

38 mm, Drill Bit Point Angle 140 Degrees , R Thinning Point, Carbide, WXL, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.0938.Carbide Drills for Stainless Steel, Drill Bit Size 2.

Cutting Tools,Drill Bits,Screw Machine Length Drill Bits

OSG