Permanent Permanent Paint Marker/Valve Action, Fine Tip, Orange Color Family, Paint

69 mil, Powdered/Powder-Free Powder-Free, Silicone-Free No, Standards ISO 9001: 2008 and 89/686/EEC, NEBB Certified ISO Class 4, EN420:2003, EN374-1, 2 & 3:2003, EN455-2:2009, ISO 11137-1:2006.6, Color Beige, Cuff Thickness 4.33 mil, Disposable Glove Type Chemical-Resistant, Cleanroom, Double Gloving Method Outer, Features Extended Cuff, Finger Thickness 7.87 mil, Latex-Free No, Length 12 in, Material Latex, Palm Thickness 6.

Encapsulated Suit, Anti-Static Yes, Attached Glove Material Butyl Rubber, Attached Glove Style Outer, Chest Size - Maximum 82 1/4 in, Chest Size - Minimum 65 in, Closure Features Gas Tight Zipper, Splash Guard, Downward Closing Zipper, Closure Type Zipper, Color Orange, Cuff Style Attached Glove, Entry Location Side, EPA Protection Level A, External Glove Material Butyl Rubber, Face Shield Style Wide.

5 mil, Powdered/Powder-Free Powder-Free, Silicone-Free No, Standards NFPA 1999, ASTM D 6319, Sterile/Non-Sterile Non-Sterile, Texture Grain, Texture Location Fingertips, Glove Treatments Powder-Free.9 mil, Latex-Free Yes, Length 11 1/2 in, Material Nitrile, Medical Glove Type Exam, Palm Thickness 5.

Disposable Gloves, Acceptable Quality Level (AQL) 4, Anti-Static Yes, Color Blue, Cuff Thickness 5 mil, Disposable Glove Type Chemical-Resistant, Food-Grade, General Purpose, Finger Thickness 5 mil, Latex-Free Yes, Length 9 1/2 in, Material Nitrile, Palm Thickness 4.

6880 in, Package Quantity 3.Lathe Jaw, Soft, For Use With 6 in Chucks, Overall Length 3 in, Overall Height 2 in, Overall Width 1-1/4 in, 1.

Lathe Jaw, Soft, For Use With 8 in Chucks, Overall Length 4 in, Overall Height 3 in, Overall Width 1-1/2 in, 63/64 in, Package Quantity 3.

Paint Marker, Actuation Type Valve, Compatible Surfaces Concrete, Glass, Leather, Metal, Plastic, Rubber, Stone, Vinyl, Wood, Dry Time 25 to 35 sec, GE Nuclear and Aircraft Engine Specification Compliance Not Applicable, Marking Tip Shape Bullet, Maximum Application Temperature 350 Degrees F, Maximum Performance Temperature 350 Degrees F, MIL Spec STD-2041D Compliance Yes, Minimum Application Temperature 0 Degrees F, Minimum Performance Temperature 0 Degrees F, NSF Registered No.

00 Percent, Gauge Case Material ABS, Nominal Dial Size 2 1/2 in, IP/NEMA Rating Not Rated, Hazardous Location Rating Not Rated, Compatible Process Media Air and Compatible Gases, Sensor Material Silicone, Socket Material 316L Stainless Steel, Process Connection Type NPT, Display Units bar, cm wc, ft wc, in Hg, in wc, kg/sq cm, kPa, mbar, mm Hg, oz/sq in, psig, Process Connection Gender Male, Battery Type 9V Battery.Digital Industrial Pressure Gauge, Accuracy +/-1.

Paint Marker, Actuation Type Valve, Compatible Surfaces Concrete, Glass, Leather, Metal, Plastic, Rubber, Stone, Vinyl, Wood, Dry Time 25 to 35 sec, GE Nuclear and Aircraft Engine Specification Compliance Not Applicable, Marking Tip Shape Bullet, Maximum Application Temperature 350 Degrees F, Maximum Performance Temperature 350 Degrees F, MIL Spec STD-2041D Compliance Yes, Minimum Application Temperature 0 Degrees F, Minimum Performance Temperature 0 Degrees F, NSF Registered No.

Digital Industrial Pressure Gauge, Accuracy +/-1.