Wing Nut, 1/2-13, Malleable Iron, Plain, 1.25 In Ht, 3 In Max Wing Span, 10 PK

Concentric Reducer, Application Active Pharmaceutical Ingredients, Animal Food, Beverage, Bio-Pharmaceutical, Dairy, Food, Personal Care, Fitting Side A Connection Type Orbital Weld, Fitting Side B Connection Type Orbital Weld, Exterior Finish 32 RA, Material Grade 316L, Fitting Material Stainless Steel, Fitting Side A Tube Outer Diameter 3 in, Fitting Side B Tube Outer Diameter 4 in, Fitting Wall Thickness 0.083 in, Overall Length 3 7/8 in, Specific Fitting Shape Concentric Reducer.

Banded V-Belt, Belt Material Polyester Cords, Rubber, Edge Construction Wrapped, Industry Number 4/B46, Number of Bands 4, Outside Length 49.8 in, Reinforcing Cord Material Polyester, Thickness 1/2 in, Top Width 2 43/64 in, Belt Trade Size B, V-Belt Type Banded, Maximum Operating Temperature 194 Degrees F, Minimum Operating Temperature -22 Degrees F, Resistance Properties Heat Resistant, Oil Resistant.

Streamliner(R) V Dispenser, Included Grease Type Exxon Unirex EP2, Lubrication Point Type Single, Feeder Capacity 250 cc, Operating Temperature - Minimum -4 Degrees F, Operating Temperature - Maximum 140 Degrees F, Spring Force 80 psi, Connection Size 3/8 in, Pre-Filled Status Pre-Filled, Connection Type NPT, Feeder Material Polycarbonate, Flow Rate Adjustability Adjustable, Delivery Method Continuous, Includes Service Indicator, Refillable No, Grease Color Blue, Overall Diameter 3 in.

125 in, Bolt Size 5/16 in x 1-1/4 in, System of Measurement Standard, Flange Type Solid, Includes Cap Screws, Material Ductile Iron, SAE Grade G3000, Taper 3/4 in per ft for Shaft Clamping.938 in, Bolt Circle Diameter 3.

44 in, Load Capacity 4500 lb, Thread Size 5/8 In.

Hand Stamp, Character Height 1/8 in, Character Type Set Individual Character, Characters Included 4, Duty Moderate, For Maximum Surface Hardness Up to 50 on Rockwell C Scale, For Shank Diameter 1/4 in, Holder Length Not Applicable, Holder Shank Size Not Applicable, Impression Character Style Gothic, Includes 4, Product Type Hand Stamp Kit, Shank Length 2 3/8 in, Shank Thickness 1/4 in, Shank Width 1/4 in, Stamp Material Steel, Standards Not Applicable.

-13, Maximum Wing Span 3 in, Overall Height 1.25 in, Base Diameter 1 13/64 in, System of Measurement Inch, Pack Size Small Pack, Rockwell Hardness HB 82-92, Package Quantity 10.Wing Nut, Material Malleable Iron, Material Grade/Class Grade 2, Finish Plain, Thread Size 1/2 In.

03 in, System of Measurement Inch to Metric, Different Bore Sizes Yes, Torsional Stiffness 23.

-13, Maximum Wing Span 3 in, Overall Height 1.Wing Nut, Material Malleable Iron, Material Grade/Class Grade 2, Finish Plain, Thread Size 1/2 In.

1 in.Motion Control Coupling, Angular Misalignment 3 Degrees , Bore Diameter 1 5/8 in, Bore Diameter 2 11 mm, Coupling Material Aluminum, Coupling Outside Diameter 1 1/2 in, Maximum Speed 6,000 RPM, Maximum Torque 95 in-lb, Axial Motion 0.26 in-lb/Deg, Bore Type Round, Shaft Locking Type Clamp On, Number of Beams 6, Length Through Bore 2 1.03 in, System of Measurement Inch to Metric, Different Bore Sizes Yes, Torsional Stiffness 23.