58 Dia 100 Deg, Single Flute TiN Coated Premium M42 Cobalt Countersink

8.0mm Diameter x 8mm Shank 3-Flute Regular Length Blue Series Carbide End Mills For: End milling, Slotting, Sinking On: Steels, Cast Iron, Aluminum, Copper, Brass, Plastics, and Abrasive type materials.

Connection Type Arbor Included Angle 45Deg Cutting Diameter Inch 5 Cutting Width Inch 1 Material High Speed Steel FinishCoating Uncoated Arbor Hole Diameter Inch 114 45Deg, 60Deg, and 90Deg angles High Speed Steel.

Drill Bit Size mm 1425 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Flute Type Spiral Flute Cutting Direction Right Hand Shank Type Straight Through Coolant No Taper length drills are designed for general purpose drilling where longer length is required Heavy duty 135Deg split point Sizes over 12 furnished with notched point.

Reamer Diameter Decimal Inch 0407 Reamer Material High Speed Steel Shank Type Straight Flute Type Straight This high quality tool is designed for most standard reaming needs M2 High Speed Steel.

Drill Bit Size Inch 1332 Shank Taper Designation MT1 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Overall Length Inch 18 Through Coolant No.

- For synchronous, rigid tapping operations using TG collet chuck - Collet bore is exact tool diameter with square drive for accuracy and rigidity.

Tip Material Cast Iron Tip Material Grade C2 Tool Bit Type Turning Tool Bit Style BL10 Cutting Direction Left Hand Shank WidthDiameter Inch 58 Shank Height Inch 58 Overall Length Inch 4.

Head Diameter Inch 58 Number of Flutes 1 Included Angle 100 Countersink Material Cobalt Countersink FinishCoating TiN Coated Shank Diameter Inch 38 Made from premium M42, 8 cobalt HSS Excellent for countersinking abrasive, highstrength, heat resistant, exotic and other difficult to machine materials TiN coated for higher surface hardness and better lubricity to enhance productivity and longer tool life.

Tip Material Cast Iron Tip Material Grade C2 Tool Bit Type Turning Tool Bit Style BL10 Cutting Direction Left Hand Shank WidthDiameter Inch 58 Shank Height Inch 58 Overall Length Inch 4.

Head Diameter Inch 58 Number of Flutes 1 Included Angle 100 Countersink Material Cobalt Countersink FinishCoating TiN Coated Shank Diameter Inch 38 Made from premium M42, 8 cobalt HSS Excellent for countersinking abrasive, highstrength, heat resistant, exotic and other difficult to machine materials TiN coated for higher surface hardness and better lubricity to enhance productivity and longer tool life.