reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs
J.W. WINCO

DIN466-M5 Knurled Nut

About The .DIN 466 knurled nuts are machined from solid bar.

DIN 466 knurled nuts are machined from solid bar.

Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs

DIN466-M5 Knurled Nut

Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs

Specifications of DIN466-M5 Knurled Nut

Category
Instockinstock

Last Updated

DIN466-M5 Knurled Nut
More Varieties

Rating :- 8.27 /10
Votes :- 32
Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

GN605-M5-20-AN Socket Set Screw This allows full clamping of the flat faced ball at all times. Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees. The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces..

  • Screws & Bolts,Set Screws
  • J.W. WINCO
    • GN 903 spindle assemblies are an economical choice for use with various toggle clamps that require manual clamping height adjustments on even or uneven surfaces.

    GN 903 spindle assemblies are an economical choice for use with various toggle clamps that require manual clamping height adjustments on even or uneven surfaces.

    GN903-25-M10-74-ST Spindle Assembly The hexagon nuts are included. Plastic thrust pad can be easily detached from and reassembled to screw.

  • Workholding & Machine Tool Accessories,Toolholder Accessories
  • J.W. WINCO
    • GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    .JW Winco GN115-SCT-30-SW Cam Latch The beveled edges of the latch arm create a smooth latching of the door.

  • Door Hardware & Components,Door Latches,Cam Latches
  • J.W. WINCO
    • GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    .JW Winco GN115-SK10-24 Cam Latch The beveled edges of the latch arm create a smooth latching of the door.

  • Door Hardware & Components,Door Latches,Cam Latches
  • J.W. WINCO
    • GN31-80-M20-199-C3-W Leveling Feet
  • Hardware Supplies,Leveling Feet & Pads,Leveling Mounts
  • J.W. WINCO
    • GN 913.5 set screws with brass or plastic tip are used in applications where markings, pressure dents and damage to the workpiece are unacceptable.

    GN 913.5 set screws with brass or plastic tip are used in applications where markings, pressure dents and damage to the workpiece are unacceptable.

    5-M12-20-KU Grub Screw Delrin Tip These set screws can also be used with a variety of different hand operating components, such as levers, hand knobs, star knobs, and knurled nuts..GN913.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Handwheels
  • J.W. WINCO
    • DIN466-M5 Knurled Nut

    DIN466-M5 Knurled Nut

    DIN 466 knurled nuts are machined from solid bar..

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs
  • J.W. WINCO
    • JW Winco WN300.2-78-M8-63-SW Adjustable Lever, Zinc Die-Cast
  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO
    • DIN466-M5 Knurled Nut

    DIN466-M5 Knurled Nut

    DIN 466 knurled nuts are machined from solid bar.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Knobs
  • J.W. WINCO
    • JW Winco WN300.2-78-M8-63-SW Adjustable Lever, Zinc Die-Cast

    JW Winco WN300.2-78-M8-63-SW Adjustable Lever, Zinc Die-Cast

    2 adjustable levers are the result of modern industrial design: glass fiber reinforced thermoplastic with molded-in stainless steel inlay and zinc plated components.Made in the USA, WN 300.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO