Capped Elbow,90 Deg,Haz Loc,1/2In,AL

Globe Valve, Pipe Size - Valves 3/4 in, Connection Type - Valves FBSPT x FBSPT, Shape Straight, Body Material - Valves 316 Stainless Steel, Media - Valves Oil, Water, Valve Stem Design Non-Rising, Valve Handle Design Hand Wheel, Max. Globe Valve,Threaded,FBSPT x FBSPT Steam Pressure - Valves 80 psi WSP, Inlet to Outlet Length - Valves 3 3/16 in, Top of Handle to Inlet Center - Valves 3 67/100 in, Valve Class Class 200 - Valves 356 Degrees F, Max. Fluid Temp..

3, Pack Size Small, Minimum Thread Length Not Applicable, Type Standard Machine Screw, Washer Outside Diameter Not Applicable, Washer Thickness Not Applicable, Maximum Head Width Not Applicable.6.

Adapter, Application Air, Potable Water, Fitting Side A Connection Type MNPT, Fitting Side B Connection Type SJ, Fitting Side B Copper Tube Size 1 1/4 in, Fitting Material Wrot Copper, Fitting Side A Pipe Size 1 1/2 in, Fitting Side A Tube Outer Diameter 1 5/8 in, Fitting Side B Tube Outer Diameter 1 3/8 in, Maximum Operating Pressure 5 psi, Maximum Operating Temperature 400 Degrees F, Specific Fitting Shape Straight Adapter, Standards ASME B16.29, ASTM B75 Alloy C12200, ISO 9001.

,OD1-25/64 In.

General Purpose Anti-Seize, 10 oz, Brush-Top Can, Copper, Paste, EZ-Break, -20 Degrees F, 1,800 Degrees F, LA-CO, Copper, Flammable.

-18, Fastener Length 2 in, Head Width 0.64 in, Tensile Strength -, Head Type Spade, Maximum Head Width 0.6 in, System of Measurement Inch, Head Material Steel, Zinc, Head Shape Spade, Package Quantity 5.

Impact Wrench Washer, For Use With 231.

27 lb, Aluminum, Finish Powder Coated, Hazardous Location Rating Class I, Division 1 and 2, Groups C, D, Class II, Division 1 and 2, Groups E, F, G, Class III, Division 1 and 2, Y, For Use With IMC, Threaded Conduit.Capped Elbow - Haz Loc, Thread Gender Female to Female, Trade Size 1/2 in, Compatible Conduit Type IMC, Threaded RMC, Compatible Conduit Trade Size 1/2 in, Ends - Hazardous Fittings 1/2 in FNPT x 1/2 in FNPT, Overall Length 2 7/8 in, Overall Height 3 in, Overall Width 2 in, Weight 0.

Impact Wrench Washer, For Use With 231.

27 lb, Aluminum, Finish Powder Coated, Hazardous Location Rating Class I, Division 1 and 2, Groups C, D, Class II, Division 1 and 2, Groups E, F, G, Class III, Division 1 and 2, Y, For Use With IMC, Threaded Conduit.Capped Elbow - Haz Loc, Thread Gender Female to Female, Trade Size 1/2 in, Compatible Conduit Type IMC, Threaded RMC, Compatible Conduit Trade Size 1/2 in, Ends - Hazardous Fittings 1/2 in FNPT x 1/2 in FNPT, Overall Length 2 7/8 in, Overall Height 3 in, Overall Width 2 in, Weight 0.