Spiral Flute Tap, 3/8-16, Modified Bottoming, 3 Flutes, UNC

, Carbide, TiAlN, Non-Coolant Through, Shrink Fit, Fractional Inch, 0.Corner Radius Carbide End Mills, 1/4 in Milling Dia.06 in, 1 in, 3 in.

-11, UNC, Overall Length 3 13/16 in, Cobalt, TiN, Right Hand, Thread Length 1 1/16 in, 75 Percent Thread Drill Size 37/64 in, Thread Limit H9.Thread Forming Tap, Thread Size 5/8 In.

Cut L 5/8 in. dia,3 in.Carbide End Mill,5/8 in.

Thread Forming Tap, Thread Size 3/4 In.-10, UNC, Overall Length 4 1/4 in, Cobalt, TiN, Right Hand, Thread Length 1 3/16 in, 75 Percent Thread Drill Size 17.70 mm, Thread Limit H9.

-12, UNF, Overall Length 5 7/16 in, Powdered Metal, TiCN, Right Hand, Thread Length 1 1/4 in, Tap Chamfer Modified Bottoming, Thread Limit H6, Number of Flutes 4.Screw Thread Insert STI Tap, Thread Size 1 In.

0949.41 mm, Drill Bit Point Angle 130 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.Screw Machine Drill Bit, Drill Bit Size 2.

-16, UNC, Overall Length 3 3/8 in, High Speed Steel, TiCN, Right Hand, Thread Length 5/8 in, Tap Chamfer Modified Bottoming, Thread Limit H3, Number of Flutes 2.Screw Thread Insert STI Tap, Thread Size 3/8 In.

,3/4 in Cut 1/4 in.Carbide End Mill,1/4 in.

Screw Thread Insert STI Tap, Thread Size 3/8 In.-16, UNC, Overall Length 3 3/8 in, High Speed Steel, TiCN, Right Hand, Thread Length 5/8 in, Tap Chamfer Modified Bottoming, Thread Limit H3, Number of Flutes 2.

Carbide End Mill,1/4 in. dia.,3/4 in Cut 1/4 in.