Condenser Fan Motor,1/2 HP,825 Rpm,60 Hz

Knit Gloves, ANSI/ISEA Cut Level Not Rated, Hem Style Finished, Glove Style Knit, Knit Material Cotton, ANSI/ISEA Abrasion Level Not Rated, Hand Protection Style Glove, Additional Hazard Protection None, Palm Type Leather Palm, Glove Hand Style Left and Right, Double-Dipped No, Coating Type Uncoated, 1 Pair.

Disposable Gloves, Acceptable Quality Level (AQL) 4, Color Blue, Cuff Thickness 2 mil, Disposable Glove Type Food-Grade, General Purpose, Finger Thickness 4 mil, Latex-Free Yes, Length 9 1/2 in, Material Nitrile, Palm Thickness 2.6 mil, Powdered/Powder-Free Powder-Free, Silicone-Free No, Standards ASTM D6319, FDA 21CFR177, Sterile/Non-Sterile Non-Sterile, Texture Grain, Texture Location Fingertips, Glove Treatments Powder-Free, Size- Alpha XL, Size - Numeric 10, Package Quantity 200.

Fire Rated Access Door, Flush Mount, Insulated, Material 20 ga Galvanized Steel Door; 16 ga Cold Rolled Steel Frame, Access Door Installation Wall or Ceiling, Door Height 12 in, Door Width 12 in, Rough Opening Height 12 1/4 in, Rough Opening Width 12 1/4 in, Closure Type Self-Latching Tool Key and Ring Operated Slam Latch, Hinge Type Piano, Mounting Hole Size 8 Holes Diameter 1/4 in, Finish White Powder Coated Primer.

02 mm, Angular Misalignment 0.015 in, Durometer Hardness 55D, Axial Motion 0.

Ambient Temp.Washdown Motor,3 Ph,TENV,3/4 HP,3500 rpm 40 Degrees C, Duty Cycle Continuous, NEMA Design B, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Nonventilated, Motor Mounting Type Face, Motor Mounting Position Horizontal, Motor Frame Material Epoxy Coated Rolled Steel Class F, Max..

Radial Ball Bearing, Bearing Industry Number 61802, Bore Diameter 15 mm, Closure Double Shielded, Outer Ring Width 5 mm, Outside Diameter 24 mm, Ring Material Alloy Steel, System of Measurement Metric, Cage Material Steel, ABEC Rating 1, Application Radial and Thrust Load Application, Bore Diameter Tolerance +0/-10 micron, Dynamic Radial Load Capacity Not Available, Includes Retaining Ring No, Lubricant Material Grease.

Condenser Fan Motor,1/2 HP,825 rpm,60 Hz 60 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Air-Over, Motor Mounting Type Stud, Motor Mounting Position All Angle, Shaft Length 6 in, Lead Length 30 in. Ambient Temp.19/3.

Impeller, For Use With Grainger Item Number 3AA24B, 3AA25B, Fits Brand Dayton.

05 Full Load Amps, 48YZ Frame, 60 Hz, Motor Service Factor 1, Motor Thermal Protection Auto, Ins.Condenser Fan Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/2 HP, Nameplate RPM 825, No.

Impeller, For Use With Grainger Item Number 3AA24B, 3AA25B, Fits Brand Dayton.