TIG Rod,ER5356,1/8,36 L,10 Lb

Sandpaper Roll, Abrasive Type Coated, Abrasive Material Aluminum Oxide, Attachment Type PSA, Backing Material PSA, Backing Weight C, Color Gold, Grade Super Fine, Grit 400, Overall Length 60 ft, Overall Width 2 3/4 in.

Spray Paint, Color Family Blacks, Resin Type Alkyd, Color Black, Base Type Solvent, Dry Time 1 hr, Dry Time Tack Free 30 min, Net Weight 12 oz.

Interior/Exterior Paint, For Use On Surface Material Concrete, Drywall, Masonry, Metal, Steel, Tile, Wood, Paint Base Type Water, Paint Color Family Whites, White Pastel, Finish Gloss, Size 1 gal, Coverage 165 to 520 sq ft/gal, VOC Content VOC Free, Dry Time Recoat 2 to 4 hr, Dry Time 30 min, Application Method Brush, Roll, Spray, Standards USDA Acceptable.

Rod Seal,3 1/2 IDx4 1/4 OD,3/8 Wx5/8 H Pressure 5,000 psi, Inside Dia. 3 1/2 in, Seal Durometer 95 Shore A, Temp.

1, Series Americana.Hard Hat, ANSI Classification Type 1, Class E, Head Protection Style Full Brim, Head Protection Color Hi-Visibility Orange, Head Protection Graphics No Graphics, Fits Hat Size 6-1/2 to 8, Head Protection Material Polyethylene, Head Protection Venting No, High-Visibility Yes, Standards ANSI Z89.

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1 1/4 in, Bore Thread Size Not Applicable, Collar Outside Diameter 2 1/16 in, Inside Height to Flat Not Applicable, Clearance Diameter 2.3 in, Collar Width 1/2 in, Collar Material Stainless Steel, Keyway Width Not Applicable, Collar Material Grade 303, Keyway Depth Not Applicable, Thread Direction Not Applicable, Center to Lever Top Not Applicable, Collar Construction 2-Piece, Screw Material Stainless Steel.

125 in, Overall Length 36 in, Tensile Strength (As Welded) 240 to 296 N/mm2, Yield Strength (As Welded) 110 to 120 N/mm2, Series SuperGlaze 5356 TIG, Weight 10 lb, For Material Type Aluminum to Aluminum.TIG Welding Rods, AWS Classification ER5356, Material Aluminum, Process TIG Welding (GTAW), Overall Diameter 0.

2, Water Absorption 0.01 Percent, Temperature Range -58 Degrees to 176 Degrees F, Plastic Hardness 70D.

TIG Welding Rods, AWS Classification ER5356, Material Aluminum, Process TIG Welding (GTAW), Overall Diameter 0.

01 Percent, Temperature Range -58 Degrees to 176 Degrees F, Plastic Hardness 70D.30 ft-lb/in, Friction Coefficient 0.