reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Cutting Tools,Taps,Spiral Flute 3-Flute Taps
WIDIA GTD

Spiral Flute Tap, M10-1.50, Semi-Bottoming, Metric Coarse, 3 Flutes

About The 50 mm, Thread Limit 6HX, Class of Fit 6HX, Thread Direction Right Hand, Number of Flutes 3.5, Metric, Overall Length 100.

Spiral Flute Tap, Thread Size M10x1.5, Metric, Overall Length 100.00 mm, HSS-E-PM, TiN, Thread Length 16.00 mm, 75 Percent Thread Drill Size 8.50 mm, Thread Limit 6HX, Class of Fit 6HX, Thread Direction Right Hand, Number of Flutes 3

Cutting Tools,Taps,Spiral Flute 3-Flute Taps

Spiral Flute Tap, M10-1.50, Semi-Bottoming, Metric Coarse, 3 Flutes

Cutting Tools,Taps,Spiral Flute 3-Flute Taps

Specifications of Spiral Flute Tap, M10-1.50, Semi-Bottoming, Metric Coarse, 3 Flutes

Category
Instockinstock

Last Updated

Spiral Flute Tap, M10-1.50, Semi-Bottoming, Metric Coarse, 3 Flutes
More Varieties

Rating :- 9.73 /10
Votes :- 27
Shrink Fit Tool Holder and Adapter, Hole Dia.

Shrink Fit Tool Holder and Adapter, Hole Dia.

1/4 SHRINK FIT GP - BTKV 40 21.90mm, Nose Dia.5@20000 rpm, For Use With Carbide and HSS Tools, Series HSK40A 6.35mm, Taper Size BTKV40, Shank Dia.

  • Workholding & Machine Tool Accessories,Milling & Drilling Toolholders,End Mill Holders
  • ERICKSON
    • Taper Length Drill Bit,Size 0.4220

    Taper Length Drill Bit,Size 0.4220

    Taper Length Drill Bit, Drill Bit Size 27/64 in, Drill Bit Point Angle 132 Degrees , Conical Point, Carbide, TiAlN.

  • Cutting Tools,Drill Bits,Taper Length Drill Bits
  • WIDIA
    • End Mill,AlTiN,0.6250 in Millng Dia,4V05

    End Mill,AlTiN,0.6250 in Millng Dia,4V05

    , Carbide, Non-Coolant Through, Weldon Flat, Fractional Inch, 2 1/4 in.Corner Chamfer End Mill, 5/8 in Milling Dia.

  • Cutting Tools,End Mills,Corner Chamfer End Mills
  • WIDIA HANITA
    • Indexable Profiling End Mill, Max.

    Indexable Profiling End Mill, Max.

    00mm, ANSI Code M370D052Z06WO08, Compatible Hardware Coolant Screw, Hardware Chave Torx DT-9IP, Insert Screw M3x0.Indexable Face Mill, M370 Series, High Speed Steel, 1.

  • Cutting Tools,End Mills,Indexable End Mills
  • WIDIA
    • Indexable Profiling End Mill, Max.

    Indexable Profiling End Mill, Max.

    25mm, Overall Length 50.5 x 9 IP9, Coolant Fed Coolant Through, Cutting Application 3D Profiling, Face Milling, Helical Milling, Plunge Milling, Pocketing, Ramping: Blank, Side and Face Milling, Side/Shoulder Milling: Roughing, Slotting: Square End.

  • Cutting Tools,End Mills,Indexable End Mills
  • WIDIA