reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Plastics,Plastic Rods
ZORO SELECT

White Acetal Homopolymer Rod Stock 1 Ft. L, 7/16 Dia.

About The 25 Percent, Plastic Hardness Rockwell M94.2, Water Absorption 0.5 ft-lb/in, Friction Coefficient 0

Rod Stock, Acetal Homopolymer, Grade Standard, Plastic Length 1 ft, Plastic Diameter 7/16 in, White, Plastic Clarity Opaque, Minimum Temperature 32 Degrees F, Maximum Temperature 185 Degrees F, Tensile Strength 11,000 psi, Impact Strength 1.5 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.25 Percent, Plastic Hardness Rockwell M94

Plastics,Plastic Rods

White Acetal Homopolymer Rod Stock 1 Ft. L, 7/16 Dia.

Plastics,Plastic Rods

Specifications of White Acetal Homopolymer Rod Stock 1 Ft. L, 7/16 Dia.

Category
Instockinstock

Last Updated

White Acetal Homopolymer Rod Stock 1 Ft. L, 7/16 Dia.
More Varieties

Rating :- 9.89 /10
Votes :- 28
8.10mm Carbide TiN 140 Deg. Jobber Length Drill Bit

8.10mm Carbide TiN 140 Deg. Jobber Length Drill Bit

10 mm, Drill Bit Point Angle 140 Degrees , Carbide, EgiAs, Decimal Equivalent 0.Jobber Length Drill Bit, Drill Bit Size 8.3189, Metric, Drill Bit Point Type R Thinning Point, Non-Coolant Through.

  • Cutting Tools,Drill Bits,Jobber Length Drill Bits
  • OSG
    • Carbide End Mill,0.80mm dia,0.65mm Cut L

    Carbide End Mill,0.80mm dia,0.65mm Cut L

    Corner Radius End Mill, 0., Carbide, WXS, Straight, Metric, 0.

  • Cutting Tools,End Mills,Carbide 2-Flute End Mills
  • OSG
    • Screw Machine Drill Bit, 3.10 mm Size, 140 Degrees Point Angle, Solid Carbide, TiAlN Finish

    Screw Machine Drill Bit, 3.10 mm Size, 140 Degrees Point Angle, Solid Carbide, TiAlN Finish

    1220.10 mm, Drill Bit Point Angle 140 Degrees , R Thinning Point, Carbide, TiAlN, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.

  • Cutting Tools,Drill Bits,Screw Machine Length Drill Bits
  • OSG
    • Carbide End Mill,3.00mm dia,2.40mm Cut L

    Carbide End Mill,3.00mm dia,2.40mm Cut L

    Ball End Mill, 3 mm Milling Dia.

  • Cutting Tools,End Mills,Ball 2-Flute End Mills
  • OSG
    • Carbide End Mill,3.00mm dia,2.40mm Cut L

    Carbide End Mill,3.00mm dia,2.40mm Cut L

    Ball End Mill, 3 mm Milling Dia.

  • Cutting Tools,End Mills,Ball 2-Flute End Mills
  • OSG