Sleeve Bearing,1 3/8 IDx1 In L,PK2

Name: Sleeve Bearing, Bore Diameter 1 3/8 In, For Environment Vacuum, For Housing Bore Range 1.5308 To 1.5318 In, For Shaft Size 1.3722 To 1.3738 In, Lubrication Type Self Lubricating, Material Group Plastic, Maximum Temperature 428 Degrees F, Minimum Temperature -40 Degrees F, Outside Diameter 1 17/32 In, Overall Length 1 In, Plain Bearing Material Polymer, System Of Measurement Inch! IGUS
Brand: IGUS
SKU: CBFX-341379
Price: 13.15 USD
Availability: InStock

About The 3722 to 1.5318 in, For Shaft Size 1.3738 in, Lubrication Type Self Lubricating, Material Group Plastic, Maximum Temperature 428 Degrees F, Minimum Temperature -40 Degrees F, Outside Diameter 1 17/32 in, Overall Length 1 in, Plain Bearing Material Polymer, System of Measurement Inch

Sleeve Bearing, Bore Diameter 1 3/8 in, For Environment Vacuum, For Housing Bore Range 1.5308 to 1.5318 in, For Shaft Size 1.3722 to 1.3738 in, Lubrication Type Self Lubricating, Material Group Plastic, Maximum Temperature 428 Degrees F, Minimum Temperature -40 Degrees F, Outside Diameter 1 17/32 in, Overall Length 1 in, Plain Bearing Material Polymer, System of Measurement Inch

Bearings,V-belts & Power Transmission Equipment,Plain Bearings,Linear Sleeve Bearing

Cable Carrier,Med,Tube,OW4.69In / 119mm

Square End Mill, 1/8 in Milling Dia., Carbide, Diamond, Straight, Length of Cut 1/2 in, Overall Length 1 3/4 in, Shank Dia.

Bearings,V-belts & Power Transmission Equipment,Plain Bearings,Linear Sleeve Bearing

Specifications of Sleeve Bearing,1 3/8 IDx1 In L,PK2
Category
Instock	instock

Last Updated June 21st, 2024 06:48 am

More Varieties

Rating :- 8.17 /10

Votes :- 29

Thread Forming Tap, #5-44, Bottoming, Oxide, 0 Flutes

Thread Forming Tap, Thread Size #5-44, UNF, Overall Length 1 59/64 in, Cobalt, Black Oxide, Right Hand, Thread Length 1/4 in, 75 Percent Thread Drill Size 2.6 mm, Thread Limit H5, Class of Fit 2B.

Cutting Tools,Taps,Thread Forming Taps

OSG

Thread Forming Tap, #4-48, Plug, Bright, 0 Flutes

Thread Forming Tap, Thread Size #4-48, UNF, Overall Length 1 55/64 in, Cobalt, Bright (Uncoated), Right Hand, Thread Length 1/4 in, 75 Percent Thread Drill Size 2.32 mm, Thread Limit H3, Class of Fit 3B.

Cutting Tools,Taps,Thread Forming Taps

OSG

Thread Forming Tap, #2-64, Bottoming, TiCN, 0 Flutes

Thread Forming Tap, Thread Size #2-64, UNF, Overall Length 1 3/4 in, Cobalt, TiCN, Right Hand, Thread Length 3/8 in, 75 Percent Thread Drill Size 5/64 in, Thread Limit H2, Class of Fit 3B.

Cutting Tools,Taps,Thread Forming Taps

OSG