reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Automotive Engine,Exhaust & Ignition,Automotive Engine Gaskets & Seals,Engine Gaskets,Seals & O-Rings
SKF

Shaft Seal, 3-7/16 X 4-1/2 X 3/8, CRWA1, NBR

About The 375 in, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 10 psi, Number of Lips 2, Spring Material Carbon Steel, System of Measurement Inch, Case Coating Acrylic, For Fluid Type Animal and Vegetable Oils, Diesel, Gasoline, Greases, Hot Water, Light Heating Oil, Mineral Oils, Maximum Rotational Speed 2,220 RPM, Maximum Surface Speed 10.Rotary Shaft Seal, Design Code CRWA1, Inside Diameter 3.438 in, Outside Diameter 4

Rotary Shaft Seal, Design Code CRWA1, Inside Diameter 3.438 in, Outside Diameter 4.501 in, Overall Width 0.375 in, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 10 psi, Number of Lips 2, Spring Material Carbon Steel, System of Measurement Inch, Case Coating Acrylic, For Fluid Type Animal and Vegetable Oils, Diesel, Gasoline, Greases, Hot Water, Light Heating Oil, Mineral Oils, Maximum Rotational Speed 2,220 RPM, Maximum Surface Speed 10.1 mps

Automotive Engine,Exhaust & Ignition,Automotive Engine Gaskets & Seals,Engine Gaskets,Seals & O-Rings

Shaft Seal, 3-7/16 X 4-1/2 X 3/8, CRWA1, NBR

Automotive Engine,Exhaust & Ignition,Automotive Engine Gaskets & Seals,Engine Gaskets,Seals & O-Rings

Specifications of Shaft Seal, 3-7/16 X 4-1/2 X 3/8, CRWA1, NBR

Category
Instockinstock

Last Updated

Shaft Seal, 3-7/16 X 4-1/2 X 3/8, CRWA1, NBR
More Varieties

Rating :- 8.08 /10
Votes :- 29
Square End Mill, 3/8 in Milling Dia., High Speed Steel, TiN, Weldon Flat, Length of Cut 9/16 in, Overall Length 2 5/16 in, Shank Dia.
  • Cutting Tools,End Mills,Cobalt End Mills
  • YG-1 TOOL CO
    • Square End Mill, 5/8 in Milling Dia., High Speed Steel, Bright (Uncoated), Weldon Flat, Length of Cut 1 5/8 in, Overall Length 3 3/4 in, Shank Dia.
  • Cutting Tools,End Mills,Square End Mills
  • YG-1 TOOL CO
    • Square End Mill, 5/8 in Milling Dia., Cobalt, Bright (Uncoated), Weldon Flat, Length of Cut 4 in, Overall Length 6 1/8 in, Shank Dia.
  • Cutting Tools,End Mills,Square 4-Flute End Mills
  • YG-1 TOOL CO
    • Pillow Block Bearing,Ball,1-3/4 Bore

    Pillow Block Bearing,Ball,1-3/4 Bore

    187 in, Overall Length 7.515 in.

  • Bearings,V-belts & Power Transmission Equipment,Pillow Block & Flange Bearings,Pillow Block Bearings
  • TIMKEN
    • Pillow Block Bearing,Ball,1-3/4 Bore

    Pillow Block Bearing,Ball,1-3/4 Bore

    751 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 3/4 in, Bore Type Cylindrical, Center Height 2.Pillow Block Bearing, Base Height 0.187 in, Overall Length 7.125 in, Closure Double Sealed, Housing Material Cast Iron, Lubricant Material NGLI #2 Equivalent, Maximum Temperature 200 Degrees F, Minimum Temperature -65 Degrees F, Mount Hole Center-to-Center Length 5 55/64 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 4.

  • Bearings,V-belts & Power Transmission Equipment,Pillow Block & Flange Bearings,Pillow Block Bearings
  • TIMKEN