While In Use Weatherproof Cover, 1 Gang, 5-49/64 In H, 3-13/16 In W, 2-3/4 In D, Polycarbonate

Range Stop for T8034N,T834N,T834L Model Number T8034N1007, T822K1000, T822K1018, T822K1042, T822L1000, T827K1009, T834L1004, T834N1002, Fits Brand Honeywell Home.

Stretch Wrap Category General Purpose Hand Grade Stretch Wrap, Stretch Wrap Style Cast, Stretch Wrap Application Standard Duty, Overall Width 12 in, Overall Length 1,500 ft, Gauge 80 ga, Stretch Wrap Handle Type No Handle, Stretch Wrap Film Grade Hand Grade, Mil Thickness 0.8 mil, Sheets Per Roll Continuous Roll.

Concrete Anchor Screw, Anchor Diameter 1/4 in, Overall Length 5 in, Head Type Flat, Drive Type Torx, Material Steel, Finish Climaseal, Material Grade/Class 1022, Compatible Material Block, Brick, Concrete, Drill Bit Size 3/16 in, Screw Anchor Type Concrete Screw Anchor, System of Measurement Inch, Maximum Ultimate Shear Strength 1,440 lb, Maximum Ultimate Tension Strength 950 lb, Minimum Installation Depth 1 in, Manufacturer Location Globally Sourced, Body Length 5 in, Package Quantity 100.

Mechanical Anchor, System of Measurement Inch, Anchor Diameter 1/4 in, Thread Size 1/4 In.-20, Overall Length 2 1/8 in, Thread Length Not Applicable, Eyelet Hole Size 9/32 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 1/4 in, Minimum Installation Depth 1 1/2 in, Minimum Material Thickness 4 in, Ultimate Shear Strength (4,000 psi Concrete) 1,400 lb, Ultimate Tension Strength (4,000 psi Concrete) 1,780 lb.

Mechanics Gloves, Additional Hazard Protection None, Glove Style Mechanics, Palm Style Reinforced, Backing Style Nylon, Spandex(R) with TPR Rubber Knuckle Protection, Cuff Style Hook-and-Loop, Insulated No, Palm Material Synthetic Leather, Silicone-Free No, Glove Liner Material Unlined, Glove Back Material Nylon, Spandex(R), Glove Back Color Orange, Glove Construction Cut and Sewn, Knuckle Protection Material TPR, Standards EN, ANSI/ISEA Cut Level A2, Touchscreen Compatible No, 1 Pair.

Welding Glove, Welding Glove Application TIG, Glove Back Material Cowhide, Thumb Style Wing, Glove Cut Gunn - Full Back, Glove Size M, Cuff Material Cowhide, 1 Pair.

Coated Gloves, ANSI/ISEA Cut Level A6, Knit Material HPPE, ANSI/ISEA Abrasion Level 2, Additional Hazard Protection Cut-Resistant, Glove Insulation Material Acrylic, Standards ANSI/ISEA 105, EN 388:2016 2X43F, Insulated Yes, Glove Coating Cover Palm, Double-Dipped No, Coating Type Dipped, 1 Pair.

While In Use Weatherproof Cover, Body Material Polycarbonate, Mounting Orientation Horizontal or Vertical, Receptacle Type Duplex, GFCI, Toggle or Round, Depth 2 3/4 in, Number of Gangs 1, Width 3 7/8 in, Height 5 3/4 in, Features Receptacles Installed in a Wet Location have an Enclosure that is Weatherproof ,The Patented Insert Design Ensures Flexibility, Color Clear, Includes and Toggle Plates, Duplex, GFCI.

Coated Gloves, ANSI/ISEA Cut Level A6, Knit Material HPPE, ANSI/ISEA Abrasion Level 2, Additional Hazard Protection Cut-Resistant, Glove Insulation Material Acrylic, Standards ANSI/ISEA 105, EN 388:2016 2X43F, Insulated Yes, Glove Coating Cover Palm, Double-Dipped No, Coating Type Dipped, 1 Pair.

While In Use Weatherproof Cover, Body Material Polycarbonate, Mounting Orientation Horizontal or Vertical, Receptacle Type Duplex, GFCI, Toggle or Round, Depth 2 3/4 in, Number of Gangs 1, Width 3 7/8 in, Height 5 3/4 in, Features Receptacles Installed in a Wet Location have an Enclosure that is Weatherproof ,The Patented Insert Design Ensures Flexibility, Color Clear, Includes and Toggle Plates, Duplex, GFCI.