reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
RULAND

CntrlFlx Cplng Hub, Double, Bore 17mm, OD37.0mm, Aluminum,MCPTD37-17-A

About The 0mm length. This clamp style double insert type thin hub requires the user to mate it with one other hub and two acetal inserts. It is longer than equivalent single insert Controlflex types to couple systems with wide distances between shaft ends

It is longer than equivalent single insert Controlflex types to couple systems with wide distances between shaft ends. The use of two inserts allows for higher torque capacity than single insert styles. This hub has a 17mm bore, 37.0mm OD, and 7.0mm length. This clamp style double insert type thin hub requires the user to mate it with one other hub and two acetal inserts. This Controlflex hub is RoHS and REACH compliant and manufactured by Schmidt Kupplung in Germany. The multiple piece construction allows for a highly customizable coupling that easily combines clamp hubs with inch, metric, keyed, and keyless bores. It has a narrow width for use in applications with short shafts that may not be able to protrude completely through the clamp of a regularly sized hub. Ruland supplied Controlflex couplings are a lightweight, low inertia, and zero-backlash coupling designed for use in encoders, tachometers, resolvers, and light duty power transmission applications. It has a balanced design and can accommodate speeds of up to 15000 RPM.

Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings

CntrlFlx Cplng Hub, Double, Bore 17mm, OD37.0mm, Aluminum,MCPTD37-17-A

Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings

Specifications of CntrlFlx Cplng Hub, Double, Bore 17mm, OD37.0mm, Aluminum,MCPTD37-17-A

Category
Instockinstock

Last Updated

CntrlFlx Cplng Hub, Double, Bore 17mm, OD37.0mm, Aluminum,MCPTD37-17-A
More Varieties

Rating :- 9.75 /10
Votes :- 32
Gauge,4,0/15 psi,1/4LM,316SS

Gauge,4,0/15 psi,1/4LM,316SS

Gauge,4",0/15 psi,1/4"LM,316SS.

  • Pressure & Vacuum Measuring,Pressure Gauges
  • PIC GAUGES
    • The user can add boots to protect the joints from unwanted contaminants and increase service life.

    The user can add boots to protect the joints from unwanted contaminants and increase service life.

    This double friction bearing universal joint is manufactured in the USA. It is made from stainless steel for corrosion resistance. This double universal joint is made of two blocks, four pins, one center spacer, and two yokes.995" OD, Stainless This Ruland double friction bearing universal joint with set screws has 1.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints
  • RULAND
    • It has 0.750" x 14mm bores, 3/16" x 5mm keyways, 1.625" (41.3mm) OD, and 2.000" (50.8mm) length.

    It has 0.750" x 14mm bores, 3/16" x 5mm keyways, 1.625" (41.3mm) OD, and 2.000" (50.8mm) length.

    This bellows coupling has a balanced design for reduced vibration at high speeds of up to 10,000 RPM. This keyed clamp type bellows coupling consists of two anodized aluminum hubs and a stainless steel bellows creating a lightweight low inertia coupling. Ruland standard length bellows couplings are a high torque zero-backlash coupling commonly found in responsive systems on semiconductor, solar, test and measurement, and printing equipment.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Motion Control Couplings
  • RULAND
    • This double universal joint is made of two blocks, four pins, one center spacer, and two yokes.

    This double universal joint is made of two blocks, four pins, one center spacer, and two yokes.

    These components are manufactured to tight tolerances using proprietary processes that ensure smooth operation and high misalignment accommodation up to 90°, which is a significant improvement over commodity style double universal joints. The user can add boots to protect the joints from unwanted contaminants and increase service life..

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints
  • RULAND
    • This double universal joint is made of two blocks, four pins, one center spacer, and two yokes.

    This double universal joint is made of two blocks, four pins, one center spacer, and two yokes.

    . The user can add boots to protect the joints from unwanted contaminants and increase service life. These components are manufactured to tight tolerances using proprietary processes that ensure smooth operation and high misalignment accommodation up to 90°, which is a significant improvement over commodity style double universal joints.This double friction bearing universal joint is manufactured in the USA by Belden Universal and inventoried by Ruland for quick turnaround.

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints
  • RULAND