9/32 Inch Angle Head Open End Wrench

Hand Drive Socket 1/4 Inch Drive x 1/4 I.

1/2 Inch Drive x 13/16 Inch Deep 12-Point Impact Socket They're designed for use with both friction ring anvils and detent pin anvils.3 times the ANSI/ASME standard for proof torque.

Combining 3 tools in 1, the TEKTON 3-in-1 Stubby Phillips/Slotted Driver contains two different bit sizes and one nut driver size..

12-P.3/4 Inch Drive x 7/8 Inch 12-Point Socket Drive x 7/8 In.

100-2020 strength requirements for minimum proof torque•Satin Finish – Our crowfoot wrenches are made from 4140 chromium-molybdenum steel that's heat-treated to 50-54 HRC and abrasive-blasted for a finely textured finish•Electroless Nickel Plating – Our plating process ensures a uniform, corrosion-resistant finish across the entire surface of the crowfoot wrench•Clear Markings – The wrench sizes are laser engraved on the top surface of each tool with a large, permanent marking that’s easy to read.•Lean Design – We optimized our crowfoot wrenches for access and strength by using steel only where it matters and eliminating the excess•Exceeds Performance Standards – Tekton 3/8 inch drive crowfoot wrenches greatly exceed the ASME B1074.

.

9/32 Inch Angle Head Open End Wrench Angle Head Open.

Hand Drive Socket 3/8 Inch Drive x 21 mm.

9/32 Inch Angle Head Open End Wrench Angle Head Open.

Hand Drive Socket 3/8 Inch Drive x 21 mm.