10 C-Clamp

DUAL DURA-PREMIUM TORQUE synchronous belts feature a classic dual sided trapezoidal tooth profile. They offer a dependable, economical and hassle-free alternative to chain drives. Timing Belt, DL, 0. The backing is precisely ground for smooth uniform running.

They are manufactured to perform at identical or higher levels than all major US Manufacturer’s belts of the same type..

The tooth profile is low and has a large surface area at the tip of the tooth providing good support on sliding conveyor surfaces..4in PL, T97 They are made with a high temperature chloroprene polymer throughout the belt, and are proven through thousands of hours of customer use to be durable and dependable.

The body rubber is a highly engineered synthetic rubber compound, specially compounded for cool running, crack resistance, and excellent bonding to the outside fabric and tensile cords. 142" Outside Length, 5/8" Top Width, 1 Ribs They are manufactured to perform at dentical or higher levels than all major US Manufacturer’s belts of the same type. All DURA-EXTREME WEDGE belts are manufactured using the latest in belt technology. They allow for smaller and more compact drives.

They are manufactured to perform at identical or higher levels than all major US Manufacturer’s belts of the same type. They are made with a high temperature chloroprene polymer throughout the belt, and are proven through thousands of hours of customer use to be durable and dependable. Timing Belt, 3M, 15 x 258mm PL, T86 The helically wound tensile cords are engineered, twisted and chemically set stranded fiberglass material.All DURA-SYNC TORQUE timing belts are manufactured using the latest in synchronous belt technology.

DD DURAEXTREME METRIC belts meet or exceed USA RMA published ratings levels They are manufactured to perform at identical or higher levels than all major US Manufacturer's belts of the same type DURAEXTREME METRIC belts are single, raw edge, cogged belts that give extreme belt performance They are manufactured using high performance components The lower compression section is made of fiber reinforced synthetic rubber compound It is specifically manufactured for durable wear resistance, cool running, high heat and oil resistance, flexibility, and has been proven by thousands of hours of customer use DURAEXTREME METRIC Belts are recommended for any metric application with smaller diameter pulleys.

10" HD high-carbon steel deep throat C-clamp with copper thread and swivel pad.

EBERHARD MANUFACTURING CO EMC 4855-A ZN Folding T Handle.

10" HD high-carbon steel deep throat C-clamp with copper thread and swivel pad.

EBERHARD MANUFACTURING CO EMC 4855-A ZN Folding T Handle.