Tapered Roller Bearing Cones,0.566 W

Pipe Cement, For Material Type ABS, CPVC, PVC, Series All Purpose, Container Size 8 fl oz, Container Type Brush-Top Can, For Maximum Pipe Diameter 6 in, Working Time 2 min, Minimum Operating Temperature 40 Degrees F, Maximum Operating Temperature 110 Degrees F, Color White, Standards ASTM D2235, ASTM D2564, ASTM F493, BAAQMD Method 40, For Application Type For Drain, Waste, and Vent Pipe, Potable Water, Full Cure Time 6 min, Maximum Viscosity 500 cps, Minimum Viscosity 0 cps.

Switching Power Supplies Range -40 Degrees to 70 Degrees C.

7 mm, Closure Double Shielded, Outer Ring Width 10 mm, Outside Diameter 32 mm, Ring Material Alloy Steel, System of Measurement Metric, Cage Material Steel, Ball Material Alloy Steel, Cage Type Pressed, Dynamic Radial Load Capacity 6,750 N, Finish Chrome Plated, Includes Retaining Ring No, ISO Rating Class 0, Lubricant Material SRI 2.Radial Ball Bearing, Bearing Industry Number Special, Bore Diameter 12.

Radial Ball Bearing, Bearing Industry Number 6206, Bore Diameter 30 mm, Closure Double Sealed, Outer Ring Width 16 mm, Outside Diameter 62 mm, Ring Material Alloy Steel, Seal Type Contact, System of Measurement Metric, Cage Material Steel, ABEC Rating 1, Ball Material Alloy Steel, Bore Diameter Tolerance +0/-0.01 mm, Cage Type Pressed, Dynamic Radial Load Capacity 21,600 N, Fillet Radius 1 mm, Finish Chrome Plated, Includes Retaining Ring No, ISO Rating Class 0, Lubricant Material Polyrex EM.

Tapered Roller Bearing Cup, Bore Diameter Not Applicable, Compatible Cone Manufacturer Part Number M231649, Cup Width 1.06 in.375 in, Ring Material Alloy Steel, System of Measurement Inch, Housing Fillet Radius 0.375 in, Lubricant Material Not Applicable, Outside Diameter 8 3/4 in, Overall Width 1.

75 in, Closure Double Sealed, For Environment Food and Beverage, Housing Material Stainless Steel, Housing Type Flange Bracket, Included Bearing SUC206-19, Lubricant Material FDA/USDA-H1 Solid Grease, Maximum Speed 4,300 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -4 Degrees F.

5 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 6.Pillow Block Bearing, Base Height 1.094 in, Base Width 2.

Tapered Roller Bearing Cones.

5 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 6.

Tapered Roller Bearing Cones.