reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Power Tools and Accessories,Grinders & Accessories,Angle Grinders & Accessories
CP

Heavy Duty Angle Grinder, 4-1/2 In Dia Wheel, 3/8-24 Arbor/Shank, 1.1 Hp, For Wheel: Type 27, Tool O

About The CP Angle Grinder, Heavy Duty, 4-1/2 in Wheel Diameter, 3/8-24 Arbor/Shank, 12000 rpm Speed, 1.1 hp, 20 to 40 cfm, 90 psig Air, 1/4 in Air Inlet, Rear Exhaust Location, Lever Throttle, 3/8 in Minimum Hose, Steel Housing Material, Ergonomic Handle, 96 dB Power/85 dB Pressure Sound Level, For Wheel Type: Type 27, 10.6 in L Dimensions

CP Angle Grinder, Heavy Duty, 4-1/2 in Wheel Diameter, 3/8-24 Arbor/Shank, 12000 rpm Speed, 1.1 hp, 20 to 40 cfm, 90 psig Air, 1/4 in Air Inlet, Rear Exhaust Location, Lever Throttle, 3/8 in Minimum Hose, Steel Housing Material, Ergonomic Handle, 96 dB Power/85 dB Pressure Sound Level, For Wheel Type: Type 27, 10.6 in L Dimensions

Power Tools and Accessories,Grinders & Accessories,Angle Grinders & Accessories

Heavy Duty Angle Grinder, 4-1/2 In Dia Wheel, 3/8-24 Arbor/Shank, 1.1 Hp, For Wheel: Type 27, Tool O

Power Tools and Accessories,Grinders & Accessories,Angle Grinders & Accessories

Specifications of Heavy Duty Angle Grinder, 4-1/2 In Dia Wheel, 3/8-24 Arbor/Shank, 1.1 Hp, For Wheel: Type 27, Tool O

Category
Instockinstock

Last Updated

Heavy Duty Angle Grinder, 4-1/2 In Dia Wheel, 3/8-24 Arbor/Shank, 1.1 Hp, For Wheel: Type 27, Tool O
More Varieties

Rating :- 9.44 /10
Votes :- 29
M.K.

M.K.

Hole Saw, Series: Diamond Grit, 1-1/8 in dia, 3/4 in Cutting Depth, 3 TPI, 1/2-20 Arbor, 1/4 in dia Morse , 7/16 in Shank, Use Arbor: M24C, M34C, M44C and M24KC, Applicable Materials: Brick, Cast Iron, Ceramic Tile, Glass Block, Granite and Laminate Flooring..

  • Cutting Tools,Hole Saws & Cutters,Hole Saws
  • M.K. MORSE
    • CHAMPION HS METRIC HAND TAPS

    CHAMPION HS METRIC HAND TAPS

    CHAMPION CUTTING TOOL 308M-22X2.5-S CHAMPION HS METRIC HAND TAPS.

  • Cutting Tools,Taps,Hand Taps
  • CHAMPION CUTTING TOOL
    • Quick-Change Coated Abrasive Quick-Change Disc, 3 in Dia Disc, 40 Grit, Medium Grade, Aluminum Oxide

    Quick-Change Coated Abrasive Quick-Change Disc, 3 in Dia Disc, 40 Grit, Medium Grade, Aluminum Oxide

    CGW Coated Abrasive Quick-Change Disc, Quick-Change, Turn On Attachment, 3 in Diameter Disc, Aluminum Oxide Abrasive, 40 Grit, Medium Grade, 2-Ply Polyester Backing, 20000 rpm Maximum.

  • Sanding Abrasives,Quick Change Discs
  • CGW ABRASIVES
    • Audits are conducted every year by an independent third-party to ensure manufacturer compliance with the set standards.Three leg slings are recommended when handling unbalanced loads.

    Audits are conducted every year by an independent third-party to ensure manufacturer compliance with the set standards.Three leg slings are recommended when handling unbalanced loads.

    •THIMBLE AND THIMBLE – Both ends are protected from wear and tear with heavy-duty thimble protection, extending the working life of the sling. Each eye on these slings is formed using the mechanical Flemish Eye Splice.

  • Lifting,Pulling & Positioning,Slings,Wire Rope Slings & Wire Mesh Slings
  • HSI
    • Audits are conducted every year by an independent third-party to ensure manufacturer compliance with the set standards.Three leg slings are recommended when handling unbalanced loads.

    Audits are conducted every year by an independent third-party to ensure manufacturer compliance with the set standards.Three leg slings are recommended when handling unbalanced loads.

    •DOUBLE TAGGED FOR SAFETY – Two tags are used on HSI slings to identify WLL (Working Load Limits). When looking for strength and durability on that next big rigging job, look no further than our array of HSI Wire Rope Slings.6 ton Capacity A wide-variety of sizes and styles are available whether working on a small-load lift or preparing to maneuver a massively heavy element.

  • Lifting,Pulling & Positioning,Slings,Wire Rope Slings & Wire Mesh Slings
  • HSI