Flat Washer, Fits Bolt Size M16 ,Steel Zinc Yellow Finish, 25 PK

Grade 5, 1/4"-28 Hex Head Cap Screw, Zinc Plated Steel, 2 in L, 50 PK Thread Length 3/4 in, Head Height 5/32 in, Head Width 7/16 in, Package Quantity 50.

O-Ring,Silicone,Dash324,1-3/8,1. 5 3/8 in, Nominal Width 3/16 in, Actual Inside Dia.770,PK2 5.O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia.

Grade 8, 7/8"-14 Hex Head Cap Screw, Zinc & Yellow Plated Steel, 2-3/4 in L, 5 PK Thread Length 2 in, Head Height 35/64 in, Head Width 1 5/16 in, Package Quantity 5.

Blind Rivet, System of Measurement Inch, Overall Length 2 7/32 in, Body Length 59/64 in, Shank Diameter 0.156 in, Product Type Blind Rivet, Body Material Aluminum, Finish Plain, Head Type Dome, Head Diameter 5/16 in, Head Angle 90 Degrees , Shear Strength 190 lb, Tensile Strength 230 lb, Maximum Hole Diameter 0.164 in, Minimum Material Thickness 5/8 in, Maximum Material Thickness 3/4 in, Material Grade/Class IFI-114-11, Mandrel Material Aluminum, Features Not Applicable, Color Gray.

129 in, FDA Approved No, Package Quantity 10. O-Ring,Buna N,Dash 045,4,4. 4 1/8 in, Actual Outside Dia.

48 mm, Head Diameter 8.Socket Flat Head Screw, Head Type Flat, System of Measurement Metric, Drive Type Socket, Drive Size 2.5 mm, Material Stainless Steel, Material Grade/Class 316, Finish Plain, Thread Size M4-0.

68, Made in North America No, Manufacturer Location Globally Sourced, Material Quality Standards Not Rated, Maximum Temperature 350 Degrees C.Flat Washer, Flat Washer Type Standard, Dimensional Standards DIN 9021, Material Steel, Material Grade/Class Grade 2, Finish Zinc Yellow, For Screw Size M16, Inside Diameter 17 mm, Outside Diameter 50 mm, Maximum Thickness 3 mm, System of Measurement Metric, Minimum Thickness 3 mm, Color Yellow, Inside Diameter Tolerance 0.

8, Material Steel, Finish Zinc Plated, Thread Size M10-1.Fully Threaded Rod, Material Grade/Class Class 4.

669-0.68, Made in North America No, Manufacturer Location Globally Sourced, Material Quality Standards Not Rated, Maximum Temperature 350 Degrees C.Flat Washer, Flat Washer Type Standard, Dimensional Standards DIN 9021, Material Steel, Material Grade/Class Grade 2, Finish Zinc Yellow, For Screw Size M16, Inside Diameter 17 mm, Outside Diameter 50 mm, Maximum Thickness 3 mm, System of Measurement Metric, Minimum Thickness 3 mm, Color Yellow, Inside Diameter Tolerance 0.

8, Material Steel, Finish Zinc Plated, Thread Size M10-1.5, Overall Length 1 m, Tensile Strength 55,000 psi, System of Measurement Metric, Thread Direction Left Hand, Dimensional Standards DIN 976, Color Silver, Maximum Temperature 302 Degrees F, Minimum Temperature -58 Degrees F, Minimum Yield Strength 30,000 psi, Rockwell Hardness B67 Min.Fully Threaded Rod, Material Grade/Class Class 4.