Sumner Chain Block Hoist With 20 Ft Chain Fall, 3 Ton Load

SKOOKUM SKM-109009 PIN KNOCK OUT #109 1.25IN DIA.

Hole Saw, Series: MHSG, 1-3/8 in dia, 1-15/16 in Cutting Depth, 5/8-18 Arbor, 1/4 in dia x 3-3/32 in Morse Hole Saw, Series: MHSG, 1-3/8 in dia, 1-15/16 in Cutting Depth, 5/8-18 Arbor, 1/4 in dia x 3-3/32 in L Drill, Tungsten Carbide Cutting Edge, Steel Body, Gulleted Cutting Edge, 125 to 375 RPM, 3/8 in Chuck, Hex Shank, 3/8 in Shank, Use Arbor: MA35PSCT, Applicable Materials: Acoustic Tile, Asbestos Board, Brick, Cast Iron, Cement Board, Ceramic, Cinderblock, Composites, Computer Flooring, Fiberglass, Formica, Hardened Steel and Particleboard. These hole saws create clean holes in materials too hard or abrasive for standard bi-metal saws or so thin they would strip bi-metal or chip carbide teeth.

Norgren by Dixon R11-037R General Regulator, 3/8 in, 110 SCFM Flow Rate, 400 psig Pressure.

Dixon STBC825 T-Bolt Hose Clamp, 8.016 to 8.

Power Team Adapter Kit, For Use With: SRT7 Spring Return Bolt Tensioner, Specifications: M90.

290 ID ORING.

•• Loops are secured with a forged metal sleeve over the spliced area along with heavy-duty thimbles to protect the ends of the sling.The wide offering of Single Leg Wire Rope Slings will surely meet your rigging needs on the jobsite.•AMERICAN MADE RIGGING – Hanes Supply, Inc.

Southwire Sumner Chain Block Hoist, 3 ton Load, Fused Brake.

•• Loops are secured with a forged metal sleeve over the spliced area along with heavy-duty thimbles to protect the ends of the sling..2 ton Capacity A wide-variety of sizes are available whether working on a small-load lift or preparing to maneuver a massively heavy element.

Southwire Sumner Chain Block Hoist, 3 ton Load, Fused Brake.