Shaft Seal,TCV,0.75in ID,Fluoro Rubber

About The 375 in, Contact Type Contact Seal, Lip Material Fluoro Rubber, Maximum Pressure 10 psi, Number of Lips 2, System of Measurement Inch, Case Coating None, Seal Type Dual Lip Seal.75 in, Outside Diameter 1.5 in, Overall Width 0

Rotary Shaft Seal, Design Code TCV, Inside Diameter 0.75 in, Outside Diameter 1.5 in, Overall Width 0.375 in, Contact Type Contact Seal, Lip Material Fluoro Rubber, Maximum Pressure 10 psi, Number of Lips 2, System of Measurement Inch, Case Coating None, Seal Type Dual Lip Seal

Motors,Motor Supplies,Shaft Seals & Adapters

Shaft Seal,SC,20mm ID,Nitrile Rubber

Shaft Seal,127mm I. D.,152.4mm O. D.

Motors,Motor Supplies,Shaft Seals & Adapters

Specifications of Shaft Seal,TCV,0.75in ID,Fluoro Rubber
Category
Instock	instock

Last Updated June 29th, 2024 10:50 pm

More Varieties

Rating :- 8.06 /10

Votes :- 33

Shaft Seal, 12 x 32 x 7 mm., TCV, Fluoro Rubber

Rotary Shaft Seal, Design Code TCV, Inside Diameter 12 mm, Outside Diameter 32 mm, Overall Width 7 mm, Contact Type Contact Seal, Lip Material Fluoro Rubber, Maximum Pressure 10 psi, Number of Lips 2, System of Measurement Metric, Case Coating None, Maximum Surface Speed 999 mps, Seal Type Dual Lip Seal.

Motors,Motor Supplies,Shaft Seals & Adapters

DDS

Shaft Seal,100mm I. D.,130mm O. D.

Rotary Shaft Seal, Design Code TA, Inside Diameter 100 mm, Outside Diameter 130 mm, Overall Width 13 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 2, System of Measurement Metric, Case Coating None.

Motors,Motor Supplies,Shaft Seals & Adapters

DDS

Shaft Seal,58mm I. D.,85mm O. D.,10mm W

Rotary Shaft Seal, Design Code SC, Inside Diameter 58 mm, Outside Diameter 85 mm, Overall Width 10 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 1, System of Measurement Metric, Case Coating None.

Motors,Motor Supplies,Shaft Seals & Adapters

DDS

Shaft Seal,SC,42mm ID,Nitrile Rubber

Rotary Shaft Seal, Design Code SC, Inside Diameter 42 mm, Outside Diameter 68 mm, Overall Width 11.5 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 1, System of Measurement Metric, Case Coating None.

Motors,Motor Supplies,Shaft Seals & Adapters

DDS

Shaft Seal,TC,2.5in ID,Nitrile Rubber

75 in, Overall Width 0.Rotary Shaft Seal, Design Code TC, Inside Diameter 2.5 in, Outside Diameter 3.

Motors,Motor Supplies,Shaft Seals & Adapters

DDS

Shaft Seal,127mm I. D.,152.4mm O. D.

5 in, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 1, System of Measurement Inch, Case Coating None.

Motors,Motor Supplies,Shaft Seals & Adapters

DDS