Chain Sling, 3 Legs, 3/8, G80, Grab Hook, 20Ft

For use in low pressure, return-line applications with petroleum base fluids.

4" x 2" POLINOX® Non-Woven Finishing Drum - 5/8-11 Thread, PNL Type -A/O 180 Grit The unmounted flap wheel is designed for working on medium-sized surfaces with variable-speed angle grinders and fillet weld grinders, and can be mounted directly onto the drive system’s spindle without the need for additional clamping devices. The wide range of hardness grades and different configurations allow a variety of surface structures and roughness levels to be achieved.

2-5/16" Bi-Metal Hole Saw The saw teeth are made from high-quality M42 material..

The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance.3/8" x 1-1/2" Cartridge Roll, 1/8" AH - Full Taper, Aluminum Oxide 60 Grit For universal grinding work on metals and other materials. They consist of spirally wound coated abrasives.

7.

5MM STMPD AU NI 1K/RL.AMPHENOL SINE SS12A1F SKT 2.

Grade 80.

. Chain Sling, 2 legs, 3/8", G80, Grab Hook, W/ Chain Adjuster, 3Ft Chain adjuster included.The Starke Chain Sling will be able to handle all of your lifting needs with a working load limit of 7,100 lbs (⅜" chain). The hook type is a grab hook.

.The Starke Chain Sling will be able to handle all of your lifting needs with a working load limit of 7,100 lbs (⅜" chain). Grade 80. The hook type is a grab hook.

Grade 80.. The hook type is a grab hook.