Push-In Fitting QS-1/8-8

Drill Bit Size Inch 1964 Shank Taper Designation MT1 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Overall Length Inch 8 Through Coolant No.

Drill Bit Size mm 66 Shank Taper Designation MT5 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Overall Length Inch 1912 Through Coolant No.

Connection Type Arbor Circle Diameter Inch 332 Diameter of Cutter Inch 214 Arbor Hole Diameter Inch 1 Material High Speed Steel Number of Teeth 14 High Speed Steel.

Drill Blank Size Inch 3132 Drill Blank Size Decimal Inch 09688 Blank Length Inch 6 Made from hardened HRC 6365 high speed steel and ground, can be used as punches, gauges, pins or ground for special tools High Speed Steel 00000 00005.

Toothed Belt Axis Elga-Tb-Kf-70-500-0H With Recirculating Ball Bearing Guide Effective Diameter Of Drive Pinion=28,65 Mm, Working Stroke=500 Mm, Size=70, Stroke Reserve=0 Mm, Toothed-Belt Stretch=0,213 %.

Standards-Based Cylinder DNC-40-50-PPV Stroke=50 Mm, Piston Diameter=40 Mm, Piston Rod Thread=M12X1,25, Cushioning=Ppv: Pneumatic Cushioning Adjustable At Both Ends, Assembly Position=Any.

Push-In Fitting QS-1/8-8 Size=Standard, Nominal Size=6 Mm, Type Of Seal On Screw-In Stud=Coating, Assembly Position=Any, Container Size=10.

Width=42 Mm, Based On The Standard=Iso 5599-2, Assembly Position=Any, Pneumatic Vertical Stacking=Pressure Regulator For 2, Controller Function=(* Output Pressure Constant, * With Secondary Exhaust).Regulator Plate VABF-S2-1-R2C2-C-6 6 Bar.

Push-In Fitting QS-1/8-8 Size=Standard, Nominal Size=6 Mm, Type Of Seal On Screw-In Stud=Coating, Assembly Position=Any, Container Size=10.

Regulator Plate VABF-S2-1-R2C2-C-6 6 Bar. Width=42 Mm, Based On The Standard=Iso 5599-2, Assembly Position=Any, Pneumatic Vertical Stacking=Pressure Regulator For 2, Controller Function=(* Output Pressure Constant, * With Secondary Exhaust).