Plunger Base,Steel,10-32 Thread,Zinc

Replacement Blade, Part Type Stripper Replacement Blade Set, For Use With CSR-1575 Cable Slit & Ring Tool, Compatible with Grainger Part Number 34RP81, Compatible with Manufacturer Model Number CSR-1575, Overall Length 1/2 in.

Flat Bar Stock, Aluminum, 6061, T6511, Sheet, 12 in Overall Length, Length Tolerance +/-1.009 in, Fabrication Extruded, Heat Treatment Pre-Hardened, Heat Treatable Yes, Mechanical Finish Mill, Yield Strength 40,000 psi, Tensile Strength 45,000 psi, 95 Brinell Hardness, B95 Rockwell Hardness, Includes Material Certificate Yes, Standards AMS-QQ-A-200, ASTM B221, Minimum Temperature -320 Degrees F.5 in Thickness, Thickness Tolerance +/-0.000 in, 3/4 in Overall Width, Width Tolerance +/-0.

003 in, Overall Length 12 in, Overall Width 2 1/4 in, Fabrication Cold Finished, Heat Treatable Yes, Heat Treatment No Heat Treatment, Mechanical Finish Mill, Yield Strength 55,000 psi, Tensile Strength 80,000 psi, Brinell Hardness 70, Rockwell Hardness Not Rated, Machinability 78 Percent, Standards ASTM A108, ASTM A29, Appearance Unpolished, Length Tolerance +/-1 in.5 in, Thickness Tolerance -0.1018 Carbon Steel Rectangular Bar, Material Carbon Steel, Material Grade 1018, Thickness 0.

Flat Washer.

Coupling Nut, #8-32, Aluminum, Plain, 5/8 in Lg, 3/8 in Hex Wd L,8-32 Size,Aluminum.

25, Housing Material Alloy Steel, Shank Thread Direction Right Hand, Ball Diameter 8 mm, Housing Material Finish Black Oxide, Maximum Ball Swivel Not Applicable, Overall Length 99 mm, Race Material Not Applicable.Rod End Bolt, System of Measurement Metric, Ball Stud Center Length Not Applicable, Ball Stud Thread Length Not Applicable, Ball Stud Thread Size Not Applicable, Bore Diameter 8 mm, Head Outside Diameter 18 mm, Head Width 9 mm, Shank Thread Length 74 mm, Shank Thread Size M8-1.

Spring Plunger, Thread Size #10-32, Plunger Material Steel, Plate Width 5/8 in, Application Holder for Plunger that is Fixture Mounted via Two Screw Holes, Body Finish Zinc, Body Material Steel, Plunger Finish Zinc.

Shoulder Screw,Aluminum,1-1/8-7",1 L.

Spring Plunger, Thread Size #10-32, Plunger Material Steel, Plate Width 5/8 in, Application Holder for Plunger that is Fixture Mounted via Two Screw Holes, Body Finish Zinc, Body Material Steel, Plunger Finish Zinc.

Shoulder Screw,Aluminum,1-1/8-7",1 L.