Wedge Anchor, 3/4 Dia., 6-1/4 L, Carbon Steel Zinc Plated, 2 PK

485 in, Pack Size Small Pack, Rockwell Hardness B83, Tensile Strength 90,000 psi, Thickness Tolerance +/-0.063 in, Square Width 4 in, Maximum Thickness 0.515 in, System of Measurement Inch, Minimum Thickness 0.031 in.

Diode Model Number CGBM185KBA, CGBM185KBB, CGBM185KBC, CGBM185KFA, CGBM185KFB, CGBM185KFC, CGBM185KWA, CGBM185KWB, CGBM185KWC, CGBM187KBA, CGBM187KBB, CGBM187KBC, CGBM187KWA, CGBM187KWB, CGBM187KWC, CGLMV169HBA, CGLMV169HSA, CGMV173KBA, CGMV173KBB, CGMV173KBC, CGMV173KWA, CGMV173KWB, CGMV173KWC, CGMV174KFA, For Use With Microwaves.

Thermostat Controller,Strut/Tube.

-10, Overall Length 5 3/4 in, Tensile Strength 125,000 psi, System of Measurement Inch, Thread Direction Right Hand, Material Quality Standards ASTM A193, Maximum Temperature 977 Degrees F, Minimum Temperature -58 Degrees F, Minimum Yield Strength 105,000 psi, Rockwell Hardness C35 Max, Package Quantity 50.Fully Threaded Stud, Material Grade/Class B16, Material Steel, Finish Black Oxide, Thread Size 3/4 In.

1, Pack Size Small Pack, Package Quantity 100.Cotter Pin, System of Measurement Inch, Pin Diameter 7/64 in, Pin Type Extended Prong, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Product Type Cotter Pin, Shank Length 2 in, Manufacturer Location Globally Sourced, Standards ASME B18.8.

Disc Spring,0.

Wedge Anchor, System of Measurement Inch, Anchor Diameter 3/4 in, Thread Size 3/4 In.-10, Overall Length 6 1/4 in, Thread Length 3 3/4 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 3/4 in, Minimum Installation Depth 3 1/4 in, Ultimate Tension Strength (4,000 psi Concrete) 11,880 lb, Wedge Anchor Type Wedge Anchor, Seismic Approved No, ICC Approved for Cracked Concrete No, ICC Approved for Un-Cracked Concrete No.

Grade 8, 1/2"-13 Hex Head Cap Screw, Zinc & Yellow Plated Steel, 3 in L, 110 PK Thread Length 1 1/4 in, Head Height 5/16 in, Head Width 3/4 in, Package Quantity 110.

-10, Overall Length 6 1/4 in, Thread Length 3 3/4 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 3/4 in, Minimum Installation Depth 3 1/4 in, Ultimate Tension Strength (4,000 psi Concrete) 11,880 lb, Wedge Anchor Type Wedge Anchor, Seismic Approved No, ICC Approved for Cracked Concrete No, ICC Approved for Un-Cracked Concrete No.

Grade 8, 1/2"-13 Hex Head Cap Screw, Zinc & Yellow Plated Steel, 3 in L, 110 PK Thread Length 1 1/4 in, Head Height 5/16 in, Head Width 3/4 in, Package Quantity 110.