CAT40 100 X 414 MultiLoc Milling Chuck

Type ER Collet Series ER32 Hand or Pipe Tap Hand Through Coolant No Tap Size Metric M24M25 For synchronous, rigid tapping operations using ER collet chuck Collet bore is exact tool diameter with square drive for accuracy and rigidity.

- Steel sealed for coolant through applications - Pressure resistance tested to 2000 psi.

Head Diameter Inch 34 Number of Flutes 6 Included Angle 82 Countersink Material Solid Carbide Countersink FinishCoating Bright Shank Diameter Inch 38 For use on hardened steel up to 60HRC, high temperature alloys and other tough jobs.

Tip Material Cast Iron Tip Material Grade C2 Tool Bit Type Chamfering Tool Bit Style D12 Cutting Direction Neutral Shank WidthDiameter Inch 34 Shank Height Inch 34 Overall Length Inch 412.

Drill Bit Size Wire 74 Drill Bit Size Decimal Inch 00225 Drill Bit Material High Speed Steel Overall Length Inch 2 Flute Length Inch 1 To drill vent holes in tire molds and to clean the vent holes after tire production Fast spiral.

Shank Type Taper Shank Taper Size BT40 Hole Diameter Inch 12 Nose Diameter Decimal Inch 138 Projection Decimal Inch 25 Through Coolant Yes DIN Coolant option standard All Ground Body Premium balanced to 30,000 rpm Comes with certificate.

Taper Size CAT40 Shank Type Taper Shank Hole Diameter Decimal Inch 1 Nose Diameter Decimal Inch 241 Projection Decimal Inch 414 Extreme Rigidity The extra thick design assures a powerful clamping force capability, minimizing vibration and distortion Long Life Superior steel alloy allows tough hardening treatment for greater durability Bore Slots High accuracy and a very powerful gripping force is achieved evenly over the entire length of the chuck right down to the nose This is generated by the long fine slots of the internal bore which is an integral part of the entire body This design further assures accuracy by its selfcentering operation When the nut is firmly clamped, the greater the concentricity DIN coolant thru the flange at no extra charge Rough milling or hogging operations Improved tool life over regular end mill holders 360Deg gripping contact 00002 TIR for maximum tool life and accuracy.

Drill Bit Size Inch 2332 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Flute Type Spiral Flute Cutting Direction Right Hand Shank Type Straight Through Coolant No Taper length drills are designed for general purpose drilling where longer length is required 118Deg point.

Taper Size CAT40 Shank Type Taper Shank Hole Diameter Decimal Inch 1 Nose Diameter Decimal Inch 241 Projection Decimal Inch 414 Extreme Rigidity The extra thick design assures a powerful clamping force capability, minimizing vibration and distortion Long Life Superior steel alloy allows tough hardening treatment for greater durability Bore Slots High accuracy and a very powerful gripping force is achieved evenly over the entire length of the chuck right down to the nose This is generated by the long fine slots of the internal bore which is an integral part of the entire body This design further assures accuracy by its selfcentering operation When the nut is firmly clamped, the greater the concentricity DIN coolant thru the flange at no extra charge Rough milling or hogging operations Improved tool life over regular end mill holders 360Deg gripping contact 00002 TIR for maximum tool life and accuracy.

Drill Bit Size Inch 2332 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Flute Type Spiral Flute Cutting Direction Right Hand Shank Type Straight Through Coolant No Taper length drills are designed for general purpose drilling where longer length is required 118Deg point.