7/16 In. X 10 In. X 12 In. 4-Cutter MX4 SDS-Plus Rotary Hammer Drill Bit

Cutting Depth 1 7/8 in, Impact Rated No, Thread Size 5/8 In.5-1/2" Bi-Metal Hole Saw 5 1/2 in, Teeth per Inch 5/6, Max.-18, Pilot Drill Size 1/4 in dia x 3 3/32 in L.

032 in, Teeth per Inch 6, Tip Material Carbon Steel, Blade Material Carbon Steel, Cutting Edge Style Hook, For Material Width 1-1/2 in to 2-1/2 in, For Use With Saw Type Band Saws.Band Saw Blade, Primary Material Application Wood, Materials Cut Aluminum, Mild Steel, Plastic, Plywood, Soft Metal, Wood, Tool Brand MK Morse, Blade Series Hard Back, Use Case General/Maintenance, Blade Width 3/4 in, Blade Length 106-1/2 in, Blade Thickness 0.

035 in, Teeth per Inch 8/11, Tip Material Bi-Metal, Blade Material Bi-Metal, Cutting Edge Style Hook, For Material Thickness 1/32 in, For Material Width 1/8 in to 3/16 in, For Use With Saw Type Band Saws.Band Saw Blade, Primary Material Application Structural Shapes, Materials Cut Aluminum, Carbon Steel, Soft Metal, Structural Steel, Tool Brand MK Morse, Blade Series Challenger, Use Case General/Maintenance, Blade Width 3/4 in, Blade Length 93 in, Blade Thickness 0.

2 Degrees C, 0.4 Degrees F, Time Intervals 2 sec to 24 hr, Software Required Yes, Includes Battery, Software and Cable.

7 oz.Multipurpose Grease, NLGI Grade 2, Base Oil Mineral, Container Size 13.50mm, Timken OK Load Not Specified, Standards NSF Registered, Category Code H-1. Operating Temp.

RETAINING RING, For Drive Size 1, Crush Gauge No, Pin Material Rubber, Ring Material Rubber, Pin Style One Piece, Ring Inner Diameter 2 7/100 in, Overall Length 2 23/50 in, Pin Overall Length 54 3/4 mm.

SDS-PLUS Drill Bit, SDS Plus, 7/16 in, Carbide, 12 in Overall Length, Maximum Drilling Depth 10 in, Shank Diameter 13/32 in, Shank Hex Size Not Applicable, Bright (Uncoated).

Self Feed Drill Bit, High Speed Steel, 1 3/4 in, Hex, Bright (Uncoated), Maximum Drilling Depth 4 in, Overall Length 4 3/4 in, Shank Diameter 7/16 in, Shank Hex Size 7/16 in, 8 in.

SDS-PLUS Drill Bit, SDS Plus, 7/16 in, Carbide, 12 in Overall Length, Maximum Drilling Depth 10 in, Shank Diameter 13/32 in, Shank Hex Size Not Applicable, Bright (Uncoated).

Self Feed Drill Bit, High Speed Steel, 1 3/4 in, Hex, Bright (Uncoated), Maximum Drilling Depth 4 in, Overall Length 4 3/4 in, Shank Diameter 7/16 in, Shank Hex Size 7/16 in, 8 in.