O-Ring,Dash 318,EPDM,0.21 In.,PK50

Concrete Anchor Screw, Anchor Diameter 1/4 in, Overall Length 1 3/4 in, Head Type Hex, Drive Type External Hex, Material Steel, Finish Blue Ruspert, Material Grade/Class Case Hardened, Removable Removable, Compatible Material Block, Brick, Concrete, Wood, Drill Bit Size 3/16 in, Screw Anchor Type Concrete Screw Anchor, System of Measurement Inch, Tip Type Self-Tapping, Body Length 1 3/4 in, Package Quantity 100.

3, Head Height Not Applicable, Material Quality Standards ASTM F912, Maximum Head Height Not Applicable, Maximum Point Diameter 0.562 in, Dimensional Standards ASME B18.609 in, Minimum Head Height Not Applicable, Minimum Point Diameter 0.Socket Set Screw, Head Type Headless, Point Type Cup, System of Measurement Inch, Thread Size 1 In.

238 in, System of Measurement Inch, Thread Type Coarse, Package Quantity 100.083 in, Drive Size #2, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.

1 In. 6 in, Nominal Width 3/32 in, Actual Inside Dia.103 in, Dash Number 163, Color Black, Durometer 75 Shore A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia. O-Ring,Dash 163,Viton,0.

25 in, Product Type Blind Rivet, Body Material Steel, Finish Plain, Head Type Dome, Head Diameter 1/2 in, Head Angle 90 Degrees , Shear Strength 1,000 lb, Tensile Strength 1,240 lb, Maximum Hole Diameter 0.261 in, Minimum Material Thickness 3/16 in, Maximum Material Thickness 1/4 in, Material Grade/Class IFI-114-30, Mandrel Material Steel, Features Not Applicable, Color Gray.Blind Rivet, System of Measurement Inch, Overall Length 1 53/64 in, Body Length 1/2 in, Shank Diameter 0.

/Thread Size 5/16 In.-18, Fastener Length 1 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Thread Style Fully Threaded, Fastener Industry Standards ASME B18.

,PK50 Range -65 Degrees to 300 Degrees F, FDA Approved No, Package Quantity 50 0.21 in, Dash Number 318, Color Black, Durometer 70 Shore A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia.975 in, Actual Width 0.1.

3, For Maximum Material Thickness 1/8 in, Pack Size Small, Minimum Head Height 0.133 in, Drive Size #2, Dimensional Standards ASME B18.362 in, Head Height 0.362 in, System of Measurement Inch, Drive Phillips, Point Type AB, Package Quantity 100.

21 in, Dash Number 318, Color Black, Durometer 70 Shore A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia.975 in, Actual Width 0.,PK50 Range -65 Degrees to 300 Degrees F, FDA Approved No, Package Quantity 50 0.1.

6.Sheet Metal Screw, Head Type Pan, Finish Zinc Plated, Material Steel, Screw Size #10, Fastener Length 2 in, Head Width 0.133 in, Maximum Head Width 0.333 in, Maximum Head Height 0.