Proximity Sensor SIES-8M-PO-24V-K-0,3-M8D

Service Unit LFR-1/4-D-MINI-KG With Manual Condensate Drain. Size=Mini, Series=D, Actuator Lock=Rotary Knob With Lock, Assembly Position=Vertical +/- 5°, Grade Of Filtration=40 µm.

Connecting Cable NEBV-S1G25-K-2.5-N-LE25 Mounting Type=4-40 Unc-2B, Product Weight=490 G, Electrical Connection 1=Socket Sub-D, 25-Pin, Electrical Connection 2=Open End, 25-Wire, Nominal Operating Voltage Dc=24 V.

Push-In Fitting QB-3/8-1/2-U-M Size=Standard, Nominal Size=0,394 ", Type Of Seal On Screw-In Stud=Coating, Operating Pressure Complete Temperature Range=-13,8 - 145 Psi, Maritime Classification=See Certificate.

Valve Function=5/3 Exhausted, Type Of Actuation=Electrical, Width=42 Mm, Standard Nominal Flow Rate=1200 L/Min, Operating Pressure=-0,9 - 16 Bar.Solenoid Valve MFH-5/3E-D-1-S-C Solenoid Coil And Socket Should Be Ordered Separately.

Semi-Rotary Drive Drvs-40-270-P Size=40, Cushioning Angle=0,5 Deg, Swivel Angle=0 - 270 Deg, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any.

Vacuum Suction Cup ESV-50-CS Workpiece Radius=180 Mm, Suction Cup Diameter=50 Mm, Suction Cup Volume=38,92 Cm3, Position Of Connection=On Top.

On-Off Valve He-D-Mini For Service Units, Without Threaded Connection Plates With Frb Threaded Pin Design Structure=Piston Slide, Type Of Actuation=Manual, Sealing Principle=Soft, Exhaust-Air Function=Not Throttleable, Manual Override=None.

Proximity Sensor Sies-8M-Po-24V-K-0,3-M8D Inductive, Cable With Plug, Can Be Flush-Mounted, N/C Function Design=For T-Slot, Conforms To Standard=En 60947-5-2, Authorisation=(* Rcm Mark, * C Ul Us - Listed (Ol)), Ce Mark (See Declaration Of Conformity)=To Eu Directive For Emc, Kc Mark=Kc-Emv.

On-Off Valve He-D-Mini For Service Units, Without Threaded Connection Plates With Frb Threaded Pin Design Structure=Piston Slide, Type Of Actuation=Manual, Sealing Principle=Soft, Exhaust-Air Function=Not Throttleable, Manual Override=None.

Proximity Sensor Sies-8M-Po-24V-K-0,3-M8D Inductive, Cable With Plug, Can Be Flush-Mounted, N/C Function Design=For T-Slot, Conforms To Standard=En 60947-5-2, Authorisation=(* Rcm Mark, * C Ul Us - Listed (Ol)), Ce Mark (See Declaration Of Conformity)=To Eu Directive For Emc, Kc Mark=Kc-Emv.