reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Cutting Tools,Taps,Pipe Taps
DRILL AMERICA

3/8-18 NPT Carbon Steel Pipe Tap

About The Carbon steel pipe taps are designed to clean and or re-thread damaged or jammes pipe threads..

The thread tapers 3/4 of an inch per foot. NPT threads require the use of a sealer like teflon tape or pipe compound. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammes pipe threads. They are appropriate for threading a wide variety of materials both ferrous and non-ferrous.

Cutting Tools,Taps,Pipe Taps

3/8-18 NPT Carbon Steel Pipe Tap

Cutting Tools,Taps,Pipe Taps

Specifications of 3/8-18 NPT Carbon Steel Pipe Tap

Category
Instockinstock

Last Updated

3/8-18 NPT Carbon Steel Pipe Tap
More Varieties

3/8-18 NPT Carbon Steel Pipe Tap
Rating :- 8.17 /10
Votes :- 33
These drill bits display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel, and are especially effective in drilling tough, high tensile strength materials like stainless steel, inconel, and titanium.

These drill bits display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel, and are especially effective in drilling tough, high tensile strength materials like stainless steel, inconel, and titanium.

. The 135 split point is self-centering and reduces thrust. Heavy Duty 135 Split Point, Cobalt Steel, Jobber Length, manufactured to National Aerospace standard 907. G Cobalt Heavy Duty Jobber Length Drill Bit Sizes smaller than 1/16” or #52, and larger than 1/2” have the 118° standard point.

  • Cutting Tools,Drill Bits,Jobber Length Drill Bits
  • DRILL AMERICA
    • Annular cutters are designed for fast, efficient hole making.

    Annular cutters are designed for fast, efficient hole making.

    1-1/2"x3" HSS Annular Cutter Annular cutters cut only that material necessary to produce a quality hole..

  • Cutting Tools,Annular Cutters
  • DRILL AMERICA
    • Stepped Point Cobalt Drill Bits start easier, drill faster, increase lifespan and reduce heat compared to standard drill bits.

    Stepped Point Cobalt Drill Bits start easier, drill faster, increase lifespan and reduce heat compared to standard drill bits.

    These drills are jobberstandard length have a 135 degree split point tip and a 3 -flat shank to prevent spinning.15874mm They can be used to enlarge existing holes or to create new, smoother holes in a wide range of materials such as acrylics, steel, metal, brass and other hard metals.

  • Cutting Tools,Drill Bits,Jobber Length Drill Bits
  • DRILL AMERICA
    • The straight-flute design is recommended for most general purpose reaming.

    The straight-flute design is recommended for most general purpose reaming.

    . The right-hand spiral-flute reamer has the smooth, chatter-free action necessary for fine finishes. .1195 HSS Straight Shank Chucking Reamer It is recommended over the straight-flute for more difficult materials, better surface requirements, and applications with an interruption such as a keyway or cross hole.

  • Cutting Tools,Reamers,High Speed Steel Chucking Reamers
  • DRILL AMERICA
    • The straight-flute design is recommended for most general purpose reaming.
  • Cutting Tools,Reamers,High Speed Steel Chucking Reamers
  • DRILL AMERICA