Bearings,10.00mm Bore Dia.,7.00mm W

09, W= .437, L= 2.ZORO APPROVED SUPPLIER G009974248 Extension Spring, O= .0625 R.

50, W= .

56, W= .054.

Carburetor Kit Model Number PA-CH395-3011, PA-CH395-3031, PA-CH440-3011, PA-CH440-3031, Fits Brand KOHLER, Includes Float Bowl, (5) O-Rings, (2) Gaskets, Inlet Needle, Stud and Spring.

2 in, Package Type Pulling Pack, Application Alarm Systems, Audio Systems, Maximum Voltage Rating 300 V, NEC Article and Type 725 CL3R, 760 FPLR, 800 CMR.

2 in, Package Type Pulling Pack, Application Audio Systems, Communications, Alarm Systems, Maximum Voltage Rating 300 V.Power Limited and Communication Cable, Cable Length 500 ft, Fire Rating Riser, Number of Strands 7, Conductor Gauge 22 AWG, Insulation Material S-R PVC, Jacket Color Blue, Jacket Material PVC, Shielded Shielded, Shielding Material Overall Flexfoil Polyester Supported Aluminum Foil, Solid/Stranded Stranded, Number of Conductors 6, Outside Diameter 0.

281 in, Outside Diameter 7/8 in, Ring Material Alloy Steel, Seal Type Contact, System of Measurement Inch, ABEC Rating 1, Cage Type Sealed, Dynamic Radial Load Capacity 675 lbf, Flange Diameter Not Applicable, Flange Thickness Not Applicable, Flange Type Non-Flanged, Includes Retaining Ring No, Lubricant Material Oil.

708 in, Base Width 2.Pillow Block Bearing, Base Height 0.

281 in, Outside Diameter 7/8 in, Ring Material Alloy Steel, Seal Type Contact, System of Measurement Inch, ABEC Rating 1, Cage Type Sealed, Dynamic Radial Load Capacity 675 lbf, Flange Diameter Not Applicable, Flange Thickness Not Applicable, Flange Type Non-Flanged, Includes Retaining Ring No, Lubricant Material Oil.Miniature Ball Bearing, Bearing Industry Number R6, Bore Diameter 3/8 in, Closure Double Sealed, Outer Ring Width 0.

708 in, Base Width 2.047 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 1/2 in, Bore Type Cylindrical, Center Height 1 59/64 in, Closure Double Sealed, Expansion Type Fixed, Housing Material Cast Iron, Lubricant Material Grease, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 5 1/2 in, Mount Hole Center-to-Center Width 5 1/2 in, Mount Type Bolt-Through.Pillow Block Bearing, Base Height 0.