Branch Tee, Brass, 1 1/2 X 2 X 1 1/2 In

Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.6000 in, Dimension Type Inch, Gauge Type No-Go (Minus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.0001 in, Diameter Range 0.5101 in to 0.

25 Percent, Plastic Hardness Rockwell M94.5 ft-lb/in, Friction Coefficient 0.

6 Percent, Temperature Range 32 Degrees to 200 Degrees F, Plastic Hardness Rockwell M85.Sheet Stock, Cast Nylon, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.1875 in, Off-White, Plastic Clarity Opaque, Tensile Strength 12,000 psi, Impact Strength 0.

.

04 in, Padlock Shackle Diameter Not Applicable, Plate Material Galvanized Metal.

5 in, Retaining Rib Diameter Not Applicable, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Pack Size Small Pack, System of Measurement Inch, Hex Width Not Applicable, Color Silver, Dimensional Standards ASTM A582, Hex Width Tolerance Not Applicable, Inside Diameter Tolerance 0 to 0.14 in, Outside Diameter 0.005 in, Overall Length Tolerance +/-0.

Reducing Branch Tee, Brass, Class Class 125, 1 1/2 in, Female, NPT, 12, 2 in, Female, NPT, 12, 1 1/2 in, Female, NPT, 12, 200 psi Maximum Operating Pressure.

Spacer, Spacer Type Round, For Screw Size 1/2 in, Overall Length 2 1/4 in, Inside Diameter 0.

Reducing Branch Tee, Brass, Class Class 125, 1 1/2 in, Female, NPT, 12, 2 in, Female, NPT, 12, 1 1/2 in, Female, NPT, 12, 200 psi Maximum Operating Pressure.

005 in, Rockwell Hardness B55.