Keyless Locking Assembly,Shaft Dia. 40mm

Name: Keyless Bushing, Flange Type Not Applicable, For Bore Diameter 40 Mm, Keyless Bushing Type Single Nut Locking Assembly, Material Steel, Outside Diameter 67 Mm, Overall Width 79.4 Mm, System Of Measurement Metric, Finish Zinc Plated, Hub Contact Pressure 8,267 Psi, Maximum Transmitted Torque 547 Ft-lb, Outside Diameter Tolerance +0.003 In, CLIMAX METAL PRODUCTS
Brand: CLIMAX METAL PRODUCTS
SKU: CBFX-1964319
Price: 132.99 USD
Availability: InStock

About The 003 in.4 mm, System of Measurement Metric, Finish Zinc Plated, Hub Contact Pressure 8,267 psi, Maximum Transmitted Torque 547 ft-lb, Outside Diameter Tolerance +0.Keyless Bushing, Flange Type Not Applicable, For Bore Diameter 40 mm, Keyless Bushing Type Single Nut Locking Assembly, Material Steel, Outside Diameter 67 mm, Overall Width 79

Keyless Bushing, Flange Type Not Applicable, For Bore Diameter 40 mm, Keyless Bushing Type Single Nut Locking Assembly, Material Steel, Outside Diameter 67 mm, Overall Width 79.4 mm, System of Measurement Metric, Finish Zinc Plated, Hub Contact Pressure 8,267 psi, Maximum Transmitted Torque 547 ft-lb, Outside Diameter Tolerance +0.003 in

Bearings,V-belts & Power Transmission Equipment,Bushings,Keyless Bushings

Workers Ahead Traffic Sign, 36 in H, 36 in W, Vinyl, Diamond, No Text, 669-C/36-DGFO-MS

Metric L-Shape Hex Key, 17 mm Tip Size

Bearings,V-belts & Power Transmission Equipment,Bushings,Keyless Bushings

Specifications of Keyless Locking Assembly,Shaft Dia. 40mm
Category
Instock	instock

Last Updated May 22nd, 2024 04:28 am

Keyless Locking Assembly,Shaft Dia. 40mm

More Varieties

Rating :- 8.01 /10

Votes :- 32

End Mill,1 in.4 Flutes,TiN

Ball End Mill, 1 in Milling Dia., Carbide, TiN, Non-Coolant Through.

Cutting Tools,End Mills,Ball 4-Flute End Mills

ZORO SELECT

Corner Chamfer End Mill,5/8,Carbide

, Carbide, AlTiCrN, Non-Coolant Through, Straight, Fractional Inch, 45 Degrees , 0.0250 in, 3/4 in.

Cutting Tools,End Mills,Corner Chamfer End Mills

ZORO SELECT

Straight Flute Hand Tap , M10-1.00 , Plug , 3 Flutes, UNC

00 mm, Thread Limit D5, Number of Flutes 3.Spiral Point Tap, Thread Size M10x1, Metric Fine, Overall Length 2 15/16 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1 1/4 in, 75 Percent Thread Drill Size 9.

Cutting Tools,Taps,Straight Flute 3-Flute Taps

ZORO SELECT