reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Motors,Pump Motors,Pool Pump Motors
CENTURY

Pool Pump Motor, Permanent Split Capacitor, 1/2, 3/50 HP, 56J Frame, 3,450/1,725 Nameplate RPM

About The Pool Pump Motor, Body Dia.5, Height 11 in, HP 1/2 hp, 3/50 hp, Ins.8, Motor Application Pump, Motor Bearings Ball, Motor Design Permanent Split Capacitor, Motor Efficiency Group Standard Efficient, Motor Enclosure Design Open Dripproof, Motor Frame Material Steel

Ambient Temp. Class B, Length Less Shaft 9 3/4 in, Max. SF Amps 8.8, Motor Application Pump, Motor Bearings Ball, Motor Design Permanent Split Capacitor, Motor Efficiency Group Standard Efficient, Motor Enclosure Design Open Dripproof, Motor Frame Material Steel Pool Pump Motor, Body Dia. 5 15/16 in, Conduit Box Position F3, Duty Cycle Continuous, Finish Unfinished, Frame 56J, Hz 60, Full Load Amps 8.8/3.5, Height 11 in, HP 1/2 hp, 3/50 hp, Ins. 6.4 in, Bolt Circle Dia. 40 Degrees C, Max.

Motors,Pump Motors,Pool Pump Motors

Pool Pump Motor, Permanent Split Capacitor, 1/2, 3/50 HP, 56J Frame, 3,450/1,725 Nameplate RPM

Time Delay, Delay on Make, 1.5 Contact Rating (Amps), 18 To 240 Volts
Class B, Max.
More from CENTURY & 6.4 In, Bolt Circle Dia.
Search

Motors,Pump Motors,Pool Pump Motors

Specifications of Pool Pump Motor, Permanent Split Capacitor, 1/2, 3/50 HP, 56J Frame, 3,450/1,725 Nameplate RPM

Category
Instockinstock

Last Updated

Pool Pump Motor, Permanent Split Capacitor, 1/2, 3/50 HP, 56J Frame, 3,450/1,725 Nameplate RPM
More Varieties

Rating :- 9.51 /10
Votes :- 30
Impact Resistant Gloves,Sz L,Ylw/Grn,PR

Impact Resistant Gloves,Sz L,Ylw/Grn,PR

Mechanics Gloves, Additional Hazard Protection Impact-Resistant, Glove Style Riggers, Cut-Resistance Coverage Palm Side, Palm Style Single Layer, ANSI/ISEA Impact Level 1, Backing Style Nylon with TPR Rubber Knuckle Protection, Cuff Style Gauntlet, Insulated No, Palm Material Synthetic Leather, Silicone-Free No, Glove Liner Material Unlined, Glove Back Material Nylon, Glove Back Color Yellow, Glove Construction Cut and Sewn, Knuckle Protection Material TPR, Standards EN, ANSI/ISEA Cut Level A2.

  • Personal Protective Equipment (PPE),Gloves & Hand Protection,Anti-Vibration Gloves
  • IRONCLAD PERFORMANCE WEAR
    • Anti-Vibration Glove,Black,Knit Cuff

    Anti-Vibration Glove,Black,Knit Cuff

    Mechanics Gloves, Additional Hazard Protection None, Glove Style Mechanics, Palm Style Gel Padding, Backing Style Nylon, Cuff Style Hook-and-Loop, Insulated No, Palm Material Synthetic Leather, Silicone-Free No, Glove Liner Material Unlined, Glove Back Material Nylon, Glove Back Color Black/Gray, Glove Construction Cut and Sewn, Standards EN, Touchscreen Compatible No, 1 Pair.

  • Personal Protective Equipment (PPE),Gloves & Hand Protection,Anti-Vibration Gloves
  • IRONCLAD PERFORMANCE WEAR
    • Mini Ball Valve, Body Material Nickel-Plated Brass, Body Style Inline, 1-Piece, Pipe Size 3/8 in, Connection Type FNPT x MNPT, Full Port, Max.

    Mini Ball Valve, Body Material Nickel-Plated Brass, Body Style Inline, 1-Piece, Pipe Size 3/8 in, Connection Type FNPT x MNPT, Full Port, Max.

    3/8" FNPT x MNPT Nickel Brass Mini Ball Valve Inline Range -20 Degrees to 370 Degrees F, Ball Material Chrome Plated Brass, Seat Material PTFE, Stem Type Blowout Proof, Handle Type Wedge, Handle Material Zinc Cast, Stem Material Brass Pressure 600 psi CWP, Max..

  • Pipes,Valves & Fittings,Valves,Ball Valves
  • ZORO SELECT
    • Air Disc Sander,4.3 lb,1.4 hp,8600 RPM

    Air Disc Sander,4.3 lb,1.4 hp,8600 RPM

    4 hp, Duty Industrial, Grip Type Right Angle with Side Handle, Air Consumption 33 cfm, Required Pressure 90 psi, Air Inlet Size 3/8 in, Air Inlet Type NPT, Minimum Hose Size 1/2 in, Spindle Thread Size 5/8 in - 11.Air Disc Sander, Product Type Air-Powered Disc Sander, Included Pad Sizes Not Applicable, Minimum Wheel Diameter Not Applicable, Maximum Wheel Diameter Not Applicable, Maximum Disc Speed 8,600 RPM, Speed Settings Variable, Abrasive Mount Type Arbor, Vacuum Type Non-Vacuum, Horsepower 1.

  • Air-Powered & Pneumatic Tools,Air Sanders,Buffers & Polishers
  • INGERSOLL-RAND
    • Air Disc Sander,4.3 lb,1.4 hp,8600 RPM

    Air Disc Sander,4.3 lb,1.4 hp,8600 RPM

    4 hp, Duty Industrial, Grip Type Right Angle with Side Handle, Air Consumption 33 cfm, Required Pressure 90 psi, Air Inlet Size 3/8 in, Air Inlet Type NPT, Minimum Hose Size 1/2 in, Spindle Thread Size 5/8 in - 11.Air Disc Sander, Product Type Air-Powered Disc Sander, Included Pad Sizes Not Applicable, Minimum Wheel Diameter Not Applicable, Maximum Wheel Diameter Not Applicable, Maximum Disc Speed 8,600 RPM, Speed Settings Variable, Abrasive Mount Type Arbor, Vacuum Type Non-Vacuum, Horsepower 1.

  • Air-Powered & Pneumatic Tools,Air Sanders,Buffers & Polishers
  • INGERSOLL-RAND