Utility And Sump Pump,115VAC,110W

Spill Tray, Color Black, Connectable No, Dimensions 37 3/4 in L x 34 in W x 5 1/2 in H, Height 5 1/2 in, Includes Drain No, Indoor/Outdoor Use Indoor, Length 37 3/4 in, Shape Rectangle, Spill Capacity 23 gal, Supports EPA Compliance No, Supports NPDES Compliance No, Supports SPCC Compliance No, Tray Material Polyethylene, Usable Dimensions 31 7/8 in L x 28 3/8 in W, Usable Length 31 7/8 in, Usable Width 28 3/8 in, Width 34 in.

Heating Tape, Adjustable Thermostat Control, 120VAC, 864W, 2"W x 6'L 425 Degrees F, Accuracy +/-10 Degrees F, Voltage 120 V, Wattage 864, Amps 7. Range (C) 10 Degrees to 218 Degrees , Temp.

Drum Heater, Current Rating 2.23 W/sq in, Watts 300 W, Drum Diameter - Maximum 22 1/3 in, Electrical Connection Type 5-15P Plug, Features Built in Electrically Grounded, Heater Length 70 in, Heater Width 4 in, Includes Nema 5-15 Plug.

8 A, Width 1 in, Length 8 ft, Features 6 ft Power Cord with Standard 2- Prong Plug (NEMA 1-15), Includes Controller Yes, Standards CE, Reach, RoHS. Range (C) 10 Degrees to 218 Degrees , Temp. Temp.Heating Tape, HSTAT Series, Temp.

Epoxy Adhesive, Container Type Syringe, Cure Method Ambient, Cured Color White, Included Components Resin and Hardener, Interior/Exterior Interior/Exterior, Low Odor No, Marine Grade Yes, Materials Bonded Fiberglass, Glass, VOC Content Weight Percentage Less Than 1 Percent, Water Resistance Water-Resistant, Working Time 5 min, Maximum Application Temperature 120 Degrees F, Maximum Performance Temperature 350 Degrees F, Resin Type Epoxy.

BAG ASSEMBLY MDSE AIR FLOW SWITCH ASSEMB.

of Head 30 gpm, Max.

Coated Gloves, Additional Hazard Protection None, Cut-Resistance Coverage Palm Side, ANSI/ISEA Impact Level 2, Cuff Style Knit, Insulated No, Palm Material HPPE, Silicone-Free Yes, Glove Liner Material Unlined, Glove Construction Seamless Knit, Standards ANSI 105, EN388:2016, Glove Coating Material Nitrile, ANSI/ISEA Cut Level A5, Touchscreen Compatible No, 1 Pair.

Submersible Sump Pump, HP 1/4, Phase - Pumps Single, Rated Voltage 120V AC, Hz 60 Hz, Amps 1 A, Switch Actuation Sensor, Switch Electrical Connection Integral, Body Material Valox, Impeller Material Nylon, Shaft Seal Material - Pumps Buna-N, PTFE, Flow Rate @ 5 Ft.

Coated Gloves, Additional Hazard Protection None, Cut-Resistance Coverage Palm Side, ANSI/ISEA Impact Level 2, Cuff Style Knit, Insulated No, Palm Material HPPE, Silicone-Free Yes, Glove Liner Material Unlined, Glove Construction Seamless Knit, Standards ANSI 105, EN388:2016, Glove Coating Material Nitrile, ANSI/ISEA Cut Level A5, Touchscreen Compatible No, 1 Pair.