Eye Bolt M24, 50 Mm ID, Steel, Zinc Plated

JW Winco GN115-SUK-36-SW Cam Latch The beveled edges of the latch arm create a smooth latching of the door..

GN606-M6-30-VR Socket Head Cap Screw This allows full clamping of the flat faced ball at all times. The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces.

GN133-B20-B12-2-BL 2-Way Connector Clamp The clamping force of the clamp onto the tube is achieved via the socket cap screws and hex nuts with nylon insert..

JW Winco GN817.4-8-8-5/8X11-CK Indexing Plunger This shape allows better visual orientation of the indexing position and is advantageous when greater unlocking forces occur..

The values given in the table assume a straight compressive load, perpendicular to the foot. The static load rating of these feet is limited due to the acceptable load rating of the stud..

.

. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. GN817-5-5-M10X1-B-NI Indexing Plunger Type G and GK with threaded stem are for applications where a special knob or attachment is required, or for such cases where the spindle is linked directly to an operating mechanism.

Eye Bolt M24, 50 mm ID, Steel, Zinc Plated Both threads must be of a equal length and the base material of equal strength to that of the bolt.

GN 817 indexing plungers with lock-out (Type C / CK) are used for applications where the plunger pin needs to stay in its retracted position.

Eye Bolt M24, 50 mm ID, Steel, Zinc Plated Both threads must be of a equal length and the base material of equal strength to that of the bolt.